Has anyone tried the GD32E230 board?

蓝雨夜

Has anyone tried the GD32E230 board? [Copy link]

 

Have you guys played with the GD32E230 board? I have also prepared a development environment to compile demos, download, and debug. There are no problems! You can exit the debug mode, and then reset the GD32E230, and it will not respond at all! I wonder how the GD32E230 you have is?

常见泽1

I haven't played it yet. I think this model doesn't seem to be used much. I haven't touched it. I'll try your question when I have time.

hujj

I powered it on and tested it after receiving it before the New Year. The downloaded routine failed to compile under KIEL. I haven't had time to work on it since then. I will slowly familiarize myself with it after the holiday.

蓝雨夜

hujj posted on 2019-2-19 13:18 I powered it on and tested it after receiving it before the New Year. The downloaded routines could not be compiled successfully under KIEL. I didn't have time to work on it after that. I will slowly get familiar with it after the holiday...

I need version 5.26 or so.

hujj

I'm so depressed. I'm level 5.25. It seems I have to upgrade kiel first.

蓝雨夜

hujj posted on 2019-2-19 14:04 I am so depressed. I am using 5.25. It seems I need to upgrade kiel first.

MDK-ARM 5.25 is ready!

hujj

I've been working on it for a whole day, but the compilation still fails.

蓝雨夜

hujj posted on 2019-2-21 16:48 I have been working on it for a whole day, but the compilation still fails.

Strange, mine is also 5.25

hujj

Under the guidance of moderator qwerghf, I registered and activated KEIL5, and then the compilation was successful. But I encountered the problem that the debug downloader could not be driven.

hujj

I suggest you download the DEMO program again and give it a try.

蓝雨夜

hujj posted on 2019-2-22 16:17 I suggest you download the DEMO program again and try it.

I tried several in GD32E230_Demo_Suites_V1.0.1\GD32E230_Demo_Suites_V1.0.1\GD32E230C_EVAL_Demo_Suites\Projects, but none of them responded after reset.

hujj

I use the SPI_TFT_LCD DEMO, which is the program originally downloaded by the development board. Now it can be tested.

蓝雨夜

hujj posted on 2019-2-22 16:42 I used the SPI_TFT_LCD DEMO, which is the program originally downloaded by the development board, and now I can test it.

I downloaded it directly under the MDK software, then under DEBUG, and it can run. If I don't enter the debug mode, it won't run.

吓于侠义

I also encountered this problem. After downloading, it couldn't run. Check the option Use MicroLIB and it will run.

huo_hu

I want to try it too. Is there any qfp64 package? I want to try its adc