EAC0945 wince6.0 BSP compilation manual

szembed

EAC0945 wince6.0 BSP compilation manual [Copy link]

 1Establish wince6.0 development environment

Note: The following software and steps are based on Windows XP, and other Windows systems have not been tested. It is recommended to copy the installation software to the hard disk for installation. The software and installation order required to establish the wince6.0 development environment are as follows: 1. Visual Studio 2005 2. Visual Studio 2005 Service Pack 1 (The English version of Visual Studio 2005 corresponds to VS80Sp1-KB926601-X86-ENU.exe, and the Chinese version corresponds to VS80sp1-KB926604-X86-CHS.exe.) 3. Visual Studio 2005 Service Pack 1 ATL SecurityUpdate (File name: VS80sp1-KB971090-X86-INTL.exe) 4. Windows Embedded CE 6.0 5. Windows Embedded CE 6.0 Platform Builder ServicePack 1 6. Windows Embedded CE 6.0 R27. Windows Embedded CE 6.0 R38. Windows Embedded CE 6.0 product update rollup (download the latest version from the Microsoft official website)1.1 Install Visual Studio 2005 and its patches. Install Visual Studio 2005, Visual Studio 2005 Service Pack 1 (pay attention to the language version), VisualStudio 2005 Service Pack 1 ATL Security Update in sequence. It is best to choose "Full" installation when installing VisualStudio 2005. 1.2 Install Windows CE 6.0 and its patches Step 1: Enter the Windows CE 6.0 R1 installation directory, double-click "WindowsEmbedded CE60.msi" to start the installation. Step 2: The following interface appears, click "Next" to continue. 388296 2 Configuring and Compiling Windows CE 6.0 Kernel and Bootloader 2.1 Detailed Explanation of BSP Driver Options There are many options in EAC-0945 BSP. The following is a detailed explanation of each option and instructions for use. 128M DDR2 RAM: This option is reserved for future expansion and is not supported on existing EAC-0945 hardware. 64M DDR2 RAM (Default)：This option is the default. The existing EAC-0945 hardware uses 64MB DDR2, which is required. 2.1.2 Audio: WM8731 codec driver, supports mic input and stereo audio output.

2.1.3Display

file:///C:/Users/Saly/AppData/Local/Temp/msohtmlclip1/01/clip_image008.jpg

AT056TN52 640x480 16bit SEBI：Support AT056TN52LCD, resolution is 640x480, color depth is RGB565.

AT070TN83 800x480 16bit SEBI：Support AT070TN83LCD, resolution is 800x480, color depth is RGB565. AT080TN52 800x600 16bit SEBI: Supports AT080TN52 LCD, with a resolution of 800x600 and a color depth of RGB565. LTN121X1L01 1024x768 16bit SEBI: Supports LTN121X1L01 LVDS LCD, with a resolution of 1024x768 and a color depth of RGB565.

VGA1024x768 16bit SEBI：Supports VGA1024x768, with a color depth of RGB565.

VGA800x600 16bit SEBI：Supports VGA800x600, with a color depth of RGB565.

*Note: Since the LCD driver comes with a relatively complete power management, the LCD display will turn off after a period of inactivity. If you need to display it all the time, add the following registry information to project.reg of the kernel customization project:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\Timeouts]

"ACUserIdle"=dword:0

"ACSystemIdle"=dword:0

"ACSuspend"=dword:0

"BattUserIdle"=dword:0

"BattSystemIdle"=dword:0

"BattSuspend"=dword:0

0

"BattSuspend"=dword:0

0

"BattSuspend"=dword:0

wupan1981

The PDF even details the steps for setting up a WinCE development environment under Windows XP.

good!