Several commonly used shortcut keys for AD

qwqwqw2088

Several commonly used shortcut keys for AD [Copy link]

In fact, these shortcut keys are more commonly used. Please share them with me. PageUp: Zoom in with the mouse as the center PageDown: Zoom out with the mouse as the center. Home: Center the position pointed by the mouse End: Refresh (redraw) *: Switch between the top layer and the bottom layer + (-) Switch layer by layer: "+" and "-" are in opposite directions Qmm (millimeter) and mil (mil) unit switch IM: Measure the distance between two points Ex: Edit X, X is the editing target, the code is as follows: (A) = arc; (C) = component; (F) = fill; (P) = pad; (N) = network; (S) = character; (T) = wire; (V) = via; (I) = connection line; (G) = filled polygon. For example, when you want to edit a component, press EC, the mouse pointer will appear "X", click the component to be edited to edit it. Px: Place X, X is the placement target, the code is the same as above. Mx: Move X, X is the move target, (A), (C), (F), (P), (S), (T), (V), (G) are the same as above, in addition (I) = flip the selected part; (O) rotate the selected part; (M) = move the selected part; (R) = rewire. Sx: Select X, X is the selected content, the codes are as follows: (I) = internal area; (O) = external area; (A) = all; (L) = all on the layer; (K) = locked part; (N) = physical network; (C) = physical connection line; (H) = pads with specified aperture; (G) = pads outside the grid. For example, if you want to select all, press SA, all graphics will light up to indicate that they have been selected, and the selected files can be copied, cleared, moved, etc.

ddllxxrr

Too shallow, not very suitable

studyqu309

ddllxxrr posted on 2018-10-6 22:26 Too shallow, not very applicable

You are right

xsl1997

Good, worth learning