super_star

A 32-bit RISC reduced instruction set development board

Overview

This project has led out all the configurable IO ports of CH563 to facilitate user development and use.
The development board produced in this project is compact and convenient for users to expand and add additional equipment in the future.
The following is an introduction to the microcontroller used in this project.
CH563 is a 32-bit RISC reduced instruction set CPU similar to ARM9. The instruction set is compatible with ARMv5TE and supports 16-bit Thumb instructions and enhanced DSP instructions. The default system frequency is 100MHZ and can reach up to 130MHZ. Highly integrated peripherals and high performance enable it to be widely used in various embedded applications.

Design Files

Related Devices

Devices	Class	introduce	Datasheet
1N230000BC0G	Analog mixed-signal IC;SMD crystal resonator (passive)	Equivalent series resistance (ESR): 50Ω Main frequency: 30MHz Frequency tolerance: ±20ppm Load capacitance: 10pF	Download
A2005WV-16P	The connector;The connector	Number of pins: 16 Connector type: Pin header Number of rows: 1 Contact type: Male Pin spacing: 0.079"(2.00mm) -	Download
GRM0335C1H100FA01D	Passive components;The patch capacitance	Accuracy: ±1% Capacitance: 10pF Rated voltage: 50V Temperature drift coefficient (dielectric material): C0G Material: C0G	Download
A2541WR-2x3P	The connector;The connector	Number of pins: 6 Connector type: Number of pin rows: 2 Contact type: Male Pin spacing: 0.100" (2.54mm) 0.100" (2.54mm) DuPont 2.54 pin header elbow gold-plated 6-position pin seat connector	Download
0603WAF1502T5E	Passive components;SMD resistor	Resistance (ohms): 15K Accuracy: ±1% Power: 1/10W Temperature coefficient: ±100ppm/°C	Download
AMS1117-3.3	Power/power management;Low dropout linear regulator (they)	Output type: Fixed Maximum input voltage: 18V Output current: 1A Output voltage (minimum/fixed): 3.235V	Download
CH563Q	The embedded processor and controller	Working voltage: 3V ~ 3.6V CPU bits: 32-Bit CPU core: RISC Main frequency (MAX): 130MHz ROM type: FLASH Monolithic network solution	Download
06035C104KAT2A	Passive components;The patch capacitance	Accuracy: ±10% Capacitance: 100nF Rated voltage: 50V Temperature drift coefficient (dielectric material): X7R Material: X7R	Download
AMS1117-1.8	Power/power management;Low dropout linear regulator (they)	Output type: fixed Maximum input voltage: 18V Output current: 1A Output voltage (minimum/fixed value): 1.764V	Download
TSA343G00-250J2	accessories;Light touch switch	Circuit structure: SPST Contact rated current: 50mA @ 12VDC Button head type: Standard Button action direction: Top Actuated	Download
0603WAJ0123T5E	Passive components;SMD resistor	Resistance (ohms): 12K Accuracy: ±5% Power: 1/10W Temperature coefficient: ±100ppm/°C	Download
GMK107BJ105KA-T	Passive components	Circuit Board Hardware - PCB TEST POINT SMD	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.