smallembedded

Quanta HSEC array card adapter board

Overview

The Xianyu hearse card is too outrageous, the spray tin plate costs 60, so I made one myself. JLC7628 is laminated and you can use coupons.
The small board on top is cut off with a small grinding wheel, inserted into the corresponding hole, and then soldered. It is recommended to use medium and low temperature tin wire and add more flux.
In addition, this position in the picture will block the studs, which need to be polished before welding.

It is recommended to use 12mm high nylon posts and m3 nylon screws with m3 holes to fix the array card.

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-14 23:47:34

Several issues on key-controlled 8X8LED dot matrix screen displaying graphics program
/* Name: Button control 8X8LED dot matrix screen display graphicsDescription: Each time K1 is pressed, the 8X8LED dot matrix screen will display different graphics in a cycle.This example uses both ex
FAQ: PolarFire SoC FPGA Secure Boot | Microchip Security Solutions Seminar Series 12
Live Topic:PolarFire SoC FPGA Secure Boot | Microchip Security Solutions Series Seminar 12PolarFire SoC FPGAs offer secure boot out of the box. In this webinar, Johnson Xu, principal applications engi
Some Problems on Measuring AC Current with Current Transformer
I would like to ask you, I use this circuit to measure AC current. The voltage on the secondary side is 1.29, but why is the final reading only 1.22? How can I reduce this error?
Simulation of staying up late is harmful to health
Just for two data and marshmallows
[RVB2601 Creative Application Development] + RTC Clock Display Experiment
[i=s]This post was last edited by symic on 2022-4-23 21:39[/i]I recently tested RTC, combined with OLED display, to display a clock that keeps beating on the screen. That is to say, the RTC of CSI int
From traditional substation to smart substation
Author: Kallikuppa Sreenivasa Focusing on green power, improving efficiency, and adopting smart grid technologies, utility companies are upgrading from traditional substations to digital substations.

Datasheet More

Circuits More