supremeOne

Just because the voice board-JQ8900N button triggers the voice module

Overview

In order to keep the appearance and appearance consistent, I specially drew a board frame similar to that of my brother, and the pad arrangement also adopted some characteristics.

Okay, let’s talk about the project now:
JQ8900N is a chip with integrated MP3 playback and IO port triggering. The operating current is about 12mA. The module adds a TP4056 charging module, and the charging current is set to 900mA. Be careful not to exceed the upper limit of the charging current when selecting the battery.

Instructions for use: 1. Connect the single-cell lithium battery to BAT+ and BAT-, and turn the switch to ON2. Connect the 8 ohm speaker to spk+ and spk- (no polarity restrictions) 3. Connect the USB to the computer, and the U disk connection will be displayed. It needs to be formatted for one use, the format is FAT4. Change the name of your favorite MP3 file to 00001.mp3 and put it into the USB flash drive. 5. Unplug the USB, off&on switch. 6. Each time IO1 and GND are shorted, the speaker will automatically Play MP3 files in U disk 7. If the file name is 00002.MP3, shorting IO2 and GND will trigger playback, and so on.

Design Files

Related Devices

Devices	Class	introduce	Datasheet
CC0402KRX5R6BB105	Passive components;capacitor	Accuracy: ±10% Capacitance: 1uF Rated voltage: 10V Temperature drift coefficient (dielectric material): X5R Material: X5R	Download
TJ-S1005SW4TGLC2G-A5	LED optoelectronic/LED;Light-emitting diodes (leds)	Illumination Color: Green Main Wavelength/Color Coordinate: 525nm Color Temperature - CCT (K): -	Download
TJ-S1005SW4TGLC9Y-A5	LED optoelectronic/LED;Light-emitting diodes (leds)	Illumination color: yellow Main wavelength/color coordinate: 590nm	Download
RC0402JR-071KL	Passive components;The resistor	Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 1000ohm, 50V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP	Download
RC0402JR-07330RL	Passive components;The resistor	Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 330ohm, 50V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP	Download
RC0402FR-07100RL	Passive components;The resistor	Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 100ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP	Download
RC0402FR-0747KL	Passive components;The resistor	Resistance (ohms): 47K Accuracy: ±1% Power: 1/16W Temperature coefficient: ±100ppm/°C	Download
0402WGF2002TCE	Passive components;SMD resistor	Resistance (ohms): 20K Accuracy: ±1% Power: 1/16W Temperature coefficient: ±100ppm/°C	Download
0402WGF1401TCE	Passive components;SMD resistor	Resistance (ohms): 1.4K Accuracy: ±1% Power: 1/16W Temperature coefficient: ±100ppm/°C	Download
CSR0402FKR100	Passive components;The resistor	Resistance (ohms): 0.1 Accuracy: ±1% Power: 1/8W Temperature coefficient: ±200ppm/°C	Download
SS-1230W-G2			Download
8002A	Analog mixed-signal IC;Audio power amplifier		Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 13:06:56

How to use interrupt to receive data or receive events in CC2652
[i=s]This post was last edited by Marsham on 2021-9-8 16:50[/i]I have never used TI chips before. After looking at the examples, I found that both callback and blocking require active reading of data,
【RT-Thread Reading Notes】 Week 1: First Introduction
[i=s]This post was last edited by Digital Leaf on 2019-4-22 21:04[/i] [size=4] I am really happy to have the opportunity to participate in this reading month event. Just like the theme says, "Read a g
Mobile Phone Power Radiation and Receiver Characteristics Measurement Technology
The mobile phone RF characteristic measurement solution includes the measurement of radiated power and receiver characteristics. This article introduces the test principle, the composition of the test
Detailed explanation of LCD modules of MSP430 microcontroller: LCD, LCD_A, LCD_B, LCD_C, LCD_E
We have previously learned about the powerful serial communication module of the MSP430 microcontroller (see "The Differences among the Serial Communication Modules USART, USI, USCI and eUSCI in MSP43
1602MAX485 module test program
485 module 1602 test procedures, drawings and parameters!
Experience in using Ti's C28x series DSP (28069) (28377), ADC experience
The ADCs used in the projects I have worked on are all on-chip ADCs of DSP. The advantage of using on-chip ADCs is that they have fast conversion speeds and save costs, which are advantages over off-c

Datasheet More

Circuits More