Sense6 power bank kit bottom plate-adapter board collection

BOM download

PCB_Bottom 1.2_2022-09-23.pdf

PCB_Bottom 1.2_2022-09-23.json

Baseboard 1.2_2022-09-23.pcbdoc

Gerber_base1.2.zip

61804

USB wireless network card-RTL8188 module adapter board (adapted to U disk shell) New

Introduction: You can attach the RTL8188 module to this adapter board and use it with a U disk shell to make a USB wireless network card that continues to shine and heat.

----------Introduction----------
As the name suggests, this project is an adapter board that recycles idle RTL8188 modules. Although it is not fast, it is enough for emergency or non-pursuit purposes. Speed ​​of device usage.
Win10 driver-free plug and play! ! Win7 needs drivers! ! Drivers are provided for MacOS but have not been tested! !
The real thing has been printed and verified, but I changed my phone too frequently and couldn't find the picture. I will wait for a while and re-print the purple board to make up for it.
This project is a reset and updated version of the RTL8188 USB network card universal U disk board project, with minor modifications and two different versions of the U disk universal version shell and G2 shell.
Only one version of the antenna is retained. If you need an external or onboard antenna, you can modify it yourself.
If you have any questions, you can report them in the comments, although I may not necessarily correct them* or directly contact @啕有有什么 to give feedback.
 
 
----------I don't have this module, but I want to do this little thing. How do I get it? ----------
The wild RTL8188 wireless module can generally be found in TV set-top boxes, some cottage boards, copycat netbooks, surveillance cameras, low-end drones (toy-grade ones), and other equipment.
I personally don’t think it’s very cost-effective to buy a new tb to do this, but even if you buy a new one, the cost is still only more than ten yuan.
 
----------Other notes and Q&A----------
1. Regarding the issue of whether MacOS can be used, after checking some sellers who sell modules and black Apple forums, I got most of them. The results all indicate that it can be used under MacOS, but unfortunately I don’t have a Mac at the moment so I can’t test it. If it works after testing, I hope you can give me your feedback in the comments. Thank you very much. (MacOS driver is included in the attachment).
2. Regarding the problem of feedback heating in the old project, after 5 minutes of inquiry, another merchant said that 1117 cannot be used for this module and can only use DCDC. The specific reason is not clear at the moment. I hope you can answer it.
3. I have no knowledge or experience in antenna design, and the antenna on the PCB is based on the on-board Wifi antenna. There will definitely be some unreasonable things. I hope someone can correct it.
4. Some of the information and some drivers I found have been shared in the attachment. If you need it, you can download it according to your own needs. The network card is driver-free under Win10, but Win7 requires a driver.