张小哥

ip2326 three-string lithium battery Type-C fast charging module

Overview

The measured maximum output power is about 20W, and the high-voltage fast charging input is successfully obtained, and the function is normal.

The default parameters are three strings of lithium batteries, maximum charging time of 12H, cut-off voltage of 12.6V, charging current of 1.2A, input undervoltage of 4.65V, without equalization.

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-15 02:06:24

Why is the rated voltage of the switch selected as VIN+VLOAD in the buck-boost topology?
Why is the rated voltage of the switch selected as VIN+V_load in the buck-boost topology?
How to solve the problem of undefined reference to `xxx' when esp32 is compiled in vscode idf environment
I added a C file to the sample project of vscode, and then used the previous IDE method to reference the functions in it. When compiling, it always prompted undefined reference to `corresponding funct
About the delay method in 28335
In your current project, there is an ADC interrupt cycle of 125us. A 1ms 1s timing flag is set in the interrupt, and then in the while loop of main, it is judged that when the flag expires, CAN data u
Detailed analysis of 7 feasible processes for PCB production
1. Circuit 1. Minimum line width: 6mil (0.153mm). That is to say, if the line width is less than 6mil, it will not be produced (the minimum line width and line spacing of the inner layer of the multil
The process is getting smaller and smaller, which is the reason why chips are always out of stock
Reprinted from: https://stor.zol.com.cn/769/7694090.htmlOn May 7, the low-key blue giant IBM announced a major breakthrough in chip manufacturing technology. According to them, it has created the worl
The administrator came in and opened the prize for the posting activity with the theme of gratitude?
RT~~~~~~~~~~~~~~~

Datasheet More

Circuits More