toothache

RELAY-CTRL

Overview

Using STM32f103c8 as the main control, TLP183 is used to drive eight Omron 10A 250V relays, which can be controlled remotely through the wireless serial port and 433 module. A six-channel electricity metering chip ADE7816 is mounted on the IIC.

Design Files

Related Devices

Devices	Class	introduce	Datasheet
DKIH-3452-100N-NK			Download
M3933/14-22N			Download
KF250-3.5-6P-1	The connector;Spring loaded terminals		Download
72R050XPR	Passive components;The resistor	Material type: Polymer Maximum voltage: 72V Trip resistance value (Max): 1.17Ω Trip current: 1A Maximum action time: 4s	Download
BSMD1206-100-16V		Maximum voltage: 16V Maximum current: 100A Holding current: 1A Trip current: 1.8A Power consumption: 600mW Initial resistance (minimum value): 50mΩ Resistance after tripping (maximum value): 270mΩ Maximum action time: 300ms Operating temperature: - 40℃~+85℃ Maximum voltage 16V Holding current 1A Maximum current 100A Trip current 1.8A	Download
BSMD0805-050-15V		Maximum voltage: 15V Maximum current: 40A Holding current: 500mA Trip current: 1A Power consumption: 500mW Initial resistance (minimum value): 100mΩ Resistance after tripping (maximum value): 850mΩ Maximum action time: 100ms Operating temperature: -40 ℃~+85℃ Maximum voltage 15V Holding current 500mA Maximum current 40A Trip current 1A	Download
22025403P00CKMT	The connector;Mother row needle row	Number of Pins: 3 Connector Type: Busbar Number: 1 Contact Type: Female Jack Pitch: 0.100"(2.54mm)	Download
PR100A23831CWGT0	Passive components;The resistor	Array/Network Resistor, Isolated, Thin Film, 0.1W, 3830ohm, 35V, 0.25% +/-Tol, -10,10ppm/Cel, 0806,	Download
CKCS5040-4.7uH/M	Passive components;Power inductor	Accuracy: ±20% Rated current: 3A DC resistance (internal resistance): 32mΩ Inductance value: 4.7uH	Download
TFPT0603L1001FV	Passive components;The resistor	Power: 3/4W Operating temperature: -55℃~+150℃ Normal temperature resistance value (25°C, ohms): 1K Resistance accuracy: ±1%	Download
RL0816S-180-F			Download
SY8120B1ABC	Power/power management;DC - DC chip	Output current: 2A Switch operating frequency: 500kHz Output type: Adjustable Number of output voltage channels: 1 Function type: Step-Down Output configuration: Positive input 18V with enable control 2A, synchronous step-down DCDC, high transient response, soft Start-up anti-surge current built-in high-precision reference source, over-current protection, compliant with Rohs standards	Download
WTR3V01F0Z-0813L	Passive components;The super capacitor	Capacitance: 1F Accuracy: -10%~+30% Rated voltage: 3V Working temperature: -40℃ ~ +65℃	Download
HC-1.0-12Y	Wire terminal plastic shell		Download
ADE7816ACPZ-RL			Download
XXHCELNANF-16.384M	Analog mixed-signal IC;SMD crystal resonator (passive)	Equivalent series resistance (ESR): 80Ω Main frequency: 16.384MHz Frequency tolerance: ±20ppm Load capacitance value: 20pF -40~+85℃	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 14:46:02

"Play with pyboardCN V2" 00 "Play Plan" of pyboardCN v2
[i=s]This post was last edited by Isolated Proton on 2018-6-16 20:18[/i] [size=5][color=#ff0000][b]1. Preface[/b][/color][/size] [size=4] In response to the activity requirements, I will first write (
An oscilloscope can only measure waveforms? That’s too narrow!
Author: Huang Gang, a member of Yibo Technology Expressway MediaIn traditional cognition, the main function of an oscilloscope is to test an input waveform, play the role of a passive input waveform a
Questions about System Control Block
I can't find any relevant information about SCB in the STM32 data sheet, and I can't find any exact information in the ARM M3/M4 data. Can anyone provide me with detailed information? Thank you.
Playing with Zynq Serial 2——GPIO peripherals of Zynq PS
Overview TheZynq GPIO peripheral controls up to 54 MIO pins and can also be connected to the PL through the EMIO interface (supporting up to 64 input pins or 128 output pins). The GPIO peripheral can
Ask the big guy, about the problem of DS1302
I have been making instruments recently. I have made several DS1302s with existing chips. They all worked properly. Then I didn't have enough new DS1302s, so I bought a domestic DS1302 from a gold med
Why is DS heavily doped in the MOS tube structure?
I watched Razavi's video and he said that the purpose of heavy doping is to make good contact with silicon and avoid diode and rectifying junction. Is this diode BS BD? And what is the reason for good

Datasheet More

Circuits More