super_star

Satellite: Miniature PCB with VL53L0X for easy integration into customer equipment

53L0-SATEL-I1

Overview

Satellite board can be used for easy integration into customer devices and basic gesture detection applications.Thanks to its 2.8V regulator and level shifters, the VL53L0X satellite board can be used in any application with a 2.8 to 5V supply.The PCB section supporting the VL53L0X module is perforated so that developers can break off the mini PCB for use in a 2.8V supply application using flying leads. This makes it easier to integrate into development and evaluation devices due to its small form factor.

Main features

Two satellite boards, integrating:
- VL53L0X 3-in-1 ranging and gesture detection sensor
- Regulator: 5 to 2.8V range input voltage (output voltage: 2.8V)
- VL53L0X signal interface level shifter
True distance measurement independent of target size and reflectance
Able to function in multi-module applications
Divisible board enabling use as mini-PCB breakout board, easy to integrate in customer device
Allows basic gesture recognition use case

Design Files

Related Devices

Devices	Class	introduce	Datasheet
VL53L0X		Proximity Sensor Environmental 2mm 2.6V to 3.5VDC 12-Pin LGA	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-23 08:04:20

Audio Amplifier Distortion and Common Improvement Methods
[size=4][color=#000000][backcolor=white] Frequency amplifier distortion refers to the phenomenon of waveform distortion of the reproduced audio signal, which is usually divided into two categories: el
MSP430 MCU Example 11 - Independent button number display
Select the P4 port of the MSP430F247 microcontroller to connect the digital tube to display the key number, and connect three keys to P5.0, P5.1, and P5.2 of the P5 port respectively. The three button
Espressif's new esp32c3 can light up your home with Bluetooth
Espressif released an esp32-c3 module at the beginning of the month, but it was too expensive. It happened that Anxinke had a sample experience, 3.9 for a development board, not bad, almost free. So I
Several standards for selecting splicing screens
LED display screens are now widely used in large shopping malls, airports, railway stations and the financial industry. The large demand has led to a lot of defective displays in the market. Due to th
915MHz Hardware Design Based on CC1310
1. OverviewThe CC1310 combines an ultra-low power RF transceiver with a powerful 48MHz Cortex-M33 microcontroller, and uses an ARM Cortex-M0 professional wireless controller to process low-level RF pr
A KEIL project downloaded from the Internet, from which file can I directly check which model of MCU is used in this project
I have a question: If I download a KEIL project from the Internet and open it without using KEIL, from which file in the project can I directly check which MCU model is used in the project?

Datasheet More

Circuits More