supremeOne

SPC58 C, E, G and N wire micro socket module in BPC292 package

SPC58XXADPT292S

Overview

The SPC58XXADPT292S Premium Evaluation Boards System supports the 32-bit SPC58XN8XC3, SPC58XE84C3 and SPC58XG84C3 STMicroelectronics' automotive microcontrollers.

The complete system consists of an SPC58XXMB/SPC57XXMB motherboard and an SPC58XXADPT292S daughter card which plugs into the motherboard. Different daughter cards are available for evaluating the whole family of device in all supported packages. All daughter cards are similar in design and concept.
The evaluation system (motherboard and daughter card) allows full access to the CPU, all the CPU's I/O signals, and the motherboard peripherals (such as CAN, SCI, LIN and FlexRAY). The daughter card itself can be used as a standalone unit when access to the I/O pins or peripherals is not needed.
The MCU is not included, it must be purchased separately. Please contact your sales representative for more details.

Main features

SPC58XXADPT292S
- Open top MCU socket
- Flexible MCU clocking options:
  - 40 MHz crystal EVB clock circuit
  - 8 MHz EVB clock oscillator circuit
  - external clock via SMA connector
- User reset switch with reset status LEDs
- 14-pin standard JTAG connector
- 34-pin connector for Nexus Aurora interface
- 10-pin header connector for SIPI interface
- Minimodule dimension: 127 mm X 114.3 mm
- Max Top components height 19.4 mm
- PCB thickness 1.6 mm
- Max Bottom components height 3.5 mm
- Standard connectors to SPC58XXMB/SPC57XXMB
SPC58XXMB/SPC57XXMB
- SPC58 modular evaluation system
- Single 12 V external power supply
- Four on-board regulators:
  - 5.0 V, 3.3 V and 1.25 V switching regulators
  - 5 V linear regulator for the ADC supplies and references
- Master power switch and regulator status LEDs
- Two 240-way high-density expansion connectors for MCU daughter cards
- All MCU signals readily accessible at a port-ordered group of 0.1” pitch headers
- RS232/SCI physical interface and standard DB9 female connector
- Two FlexRAY channels interface with a DB9 connector (for both transceivers) and two alternative connectors
- LINFlexD interface with two different style connectors
- Two high speed CAN-FD channels and two female standard DB9 connectors
- Ethernet interface with a standard RJ45 Ethernet connector
- One potentiometer for analog voltage input and four user switches and 4 user LEDs, freely connectable

Design Files

SPC58XXADPT292S microcontroller premium evaluation board for SPC58XN8XC3, SPC58XE84C3 and SPC58XG84C3

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-14 23:23:31

The diameter of the four holes on the EK140 base plate
A: What are the diameters of these four holes? B: 1.2mm
This circuit is called a "lawn mower"
"Lawn mower" circuit diagram? This is not the circuit diagram you need to design a lawn mower. Instead, it is a "test question" that the author of this article uses when interviewing new circuit desig
CC3200-LAUNCHXL
The CC3200 development board provides some resources, including onboard antenna, switch, LED light, emulator interface, UART interface and so on.The CC3200 SimpleLink Wi-Fi and IoT Solution w/ MCU Lau
How to monitor battery voltage with Arduino
[i=s]This post was last edited by Aguilera on 2019-12-15 18:20[/i]In some projects made with Arduino, we often use lithium battery packs. In order to prevent lithium batteries from being damaged by ov
Image Algorithm Transplantation to DSP and Its Optimization Steps
When you need to transplant the algorithm you have written to your DSP development board and make it run well, what do you need to do? [/backcolor][/color][/size] [size=4][color=#000000][backcolor=whi
Prize-winning live broadcast: Keysight’s Metaverse Test Series Seminar: Challenges in VR/AR Digital Interface Testing in Progress!
Prize-winning live broadcast: Keysight’s Metaverse Test Series Seminar: Challenges in VR/AR Digital Interface Testing in Progress!Click here to enter the live broadcastLive broadcast time: 10:00-11:30

Datasheet More

Circuits More