MT8816 clear address method

戮默天下

MT8816 clear address method [Copy link]

After MT8816 completes the first switch action, it writes a new address and switch control word. At this time, because the previous address is not cleared, the previous address and the current address are controlled by the current switch control word at the same time, corresponding to the switch action of the address.

So I want to ask, besides resetting and clearing the address, is there any other way to clear the last address of MT8816?

w494143467

If there is an instruction to add an address, there should be an instruction to clear the address. You can check the MT8816 manual.

戮默天下

w494143467 posted on 2021-8-30 11:35 If there is an instruction to add an address, there should be an instruction to clear the address. You can check the MT8816 manual.

Instructions are added via four row addresses and three column addresses, but there is no write-release process.