The first method: edit the library file directly in the schematic diagram, and then update it to the schematic diagram. The operation is as follows:
The first step is to select the component you want to change, right-click, and select the Edit Part option, as shown in Figure 2-55;
Figure 2-55 Schematic diagram of the device editor
The second step is to modify the corresponding library file in the pop-up interface of the component library, as shown in Figure 2-56;
Figure 2-56 Library file editing diagram
Step 3. After editing the library file as required, right-click on the page properties and click the Close option to close the page for editing the library file, as shown in Figure 2-57.
Figure 2-57 Diagram of closing the library editing page
Step 4. Select the corresponding option to be updated in the pop-up page. If there are many devices of this type in the schematic diagram, select Update All. If there is only one device of this type in the schematic diagram, select Update Current, as shown in Figure 2-58.
Figure 2-58 Update options diagram
The second method: First, change the component library in the specified library path, and then update it to the schematic. The steps are as follows:
The first step is to open the components of the library path specified by the schematic diagram, make changes as needed, and save the changes after completion;
The second step is to find the component in Design Cathe, right-click the mouse, and select Update Cathe to update, as shown in Figure 2-59;
Step 3. Select Yes in the pop-up dialog box to proceed to the next step. Select Yes on the pop-up interface, as shown in Figure 2-60.
Step 4. Search for the component in the schematic and check the component library update status.
Figure 2-59 Schematic diagram of updating components
Figure 2-60 Schematic diagram of the process of updating component options
(The above content comes from Fanyi Education)
提升卡
变色卡
千斤顶
京公网安备 11010802033920号
