I'm learning MSP430 recently. There is a library file in the book about Timer_A generating PWM waveform. Among them is the code for dual-channel PWM with dead zone. I don't quite understand it. I hope
Now when the power supply is a little bit above 3.3V, the sampled value of ADC1 is too low, the sampled value of ADC2 is too high, the sampled value of the temperature detection itself is erratic, and
Many main control chips have timers. The use of timers is nothing more than setting a timer, generating an interrupt when the time is up, and then doing something in the interrupt. If you follow this
[i=s] This post was last edited by allenliu on 2017-8-4 10:32 [/i] Install Kinetis Protocol Analyzer on Windows Adapter([url=http://www.nxp.com/products/microcontrollers-and-processors/more-processors
After setting breakpoints and single-step debugging, I terminated debugging and canceled the breakpoints. Then when I compiled and ran the code, the program always stopped at the HardWare_init functio
(I) The compiler of c6x is "cl6x.exe". Method of use Cl6x [options] [filenames] Cl6x: Compiler Options: Compiler options Filenames: C or assembly source file Description: Compiler options are one or t