Input three wires, 400+.400-.N in the figure is. The battery was originally connected here, and the switching power supply was used instead. The DCDC board does not work, and there is no voltage outpu
Charging method introduction When charging batteries, you must choose the appropriate method according to different situations and use the charging equipment correctly. This will improve work efficie
The code is as follows: while(1) { while(!USART_GetFlagStatus(USART1,USART_FLAG_RXNE)); //Receive i = USART_ReceiveData(USART1); USART_SendData(USART1,i); //Sendwhile (!USART_GetFlagStatus(USART1,USAR
Realizing the “Digital Twin System” for Industry 4.0 with Embedded Sensing and BLEAuthor: mars4zhu1. Introduction
With the vigorous development of embedded sensors, low-power wireless communication te
mars4zhuonsemi and Avnet IoT Innovation Design Competition
[i=s]This post was last edited by xiaomianzhou on 2016-4-18 11:01[/i] [align=left][color=#000][font=Arial, Helvetica, sans-serif][size=12px] I encountered some problems when debugging the NOR Flash st
As early as the 16th century, in order to avoid getting lost, navigators needed three essential navigation tools: nautical charts, compasses, and theodolites. Navigational charts provide geographical