I use the 4+3-bit DIP switch to let the user set two data at will, and the program reads the two data and then processes them accordingly. I group the 0~3 bits of the PC port and the 4~6 bits as a gro
There is a small black dot in the middle of the front, which seems to be a camera or some other sensor. After opening it, the sensor is the 3-pin thing in the middle. JD R433A is written on the iron c
Figure 1 As shown in Figure 1, the output stage of the class-D amplifier adopts push-pull output. In order to reduce the high-frequency oscillation impact caused by the reverse recovery process of the
Dear teachers, I have made a Wheatstone bridge sensor amplification and processing circuit (4 resistors). The sensor frequency is below 100HZ. I amplify and filter the sensor signal (0-10mv differenti
I am engaged in network technology and MB testing. Now I need to learn some basic knowledge of electronic circuits. I need detailed explanations. If you have any good information, please upload it. I
Existing tools: infrared radiation and hot air mixed SMT lead-free reflow furnace. I think I need steel mesh, scraper, solder paste. [b] Red glue is too complicated, is it okay? Do I need a carrier bo