Experts, please give me some advice. One of the two extended serial ports 16c554 chips under my WINCE 5.0 2440 conflicts with the CF card, but I can't find out what the problem is? Without the CF card
As the title says. I want to design a circuit board myself recently, and I need to use a DSP chip. Some people say that the DAP/uP simulator can be used to simulate and debug the system, but I don't k
I expanded a DM9000AEP on the learning board I made, downloaded the Anfulai network test program "Ex011-TCP Communication_uIP" from the Internet, changed the address, and also modified the correspondi
I need to use a pressure sensor for my graduation project, so I bought bmp085 and bmp180 modules. I use CC2430 chip as the controller. The crystal oscillator is 32MHz. The current program is modified
I wrote rtp initialization like this RTPAppSession *rtp; //RTPAppSession inherits from RTPSession and uses OnRTPPacket to process received data RTPSessionParams sessParams; RTPUDPv4TransmissionParams
For cost, integration and performance, it is necessary to use high-speed serial data interfaces and reduce semiconductor manufacturing layout. However, such smaller devices are more susceptible to ele