[size=3]A novice is learning STM32. After completing the code, he found that the serial port 1 sends and receives normally, but the serial port 2 sends abnormally (the simulation runs in single step,
The RISC-V single-board computer used in this trial provides us with 40 pin interfaces, including the SPI interface. WhatI want to share today is how to use SPI to drive the ws2812B colorful lamp bead
1. Battery voltage detection .
2. Voltage displayed on LCD1602
3. When the voltage is lower than 2.6V, the indicator light flashes.
4. When the voltage is higher than 3.3V, the indicator light flashes
"Electromechanical System Testing and Control from Entry to Mastery" is aimed at the professional knowledge background of undergraduate graduates majoring in electromechanical engineering. First, in t