logo Training

intelligent control

Total of 64 lessons ,22 hours and 32 minutes and 42 seconds
Profile

Intelligent controls refer to automatic control technology that can autonomously drive intelligent machines to achieve control goals without human intervention. The development of control theory has a history of more than 100 years. It has gone through the development stages of "classical control theory" and "modern control theory" and has entered the stage of "large system theory" and "intelligent control theory". This video talks about neural networks, fuzzy mathematics and fuzzy control, and intelligent optimization algorithms. Humanoid intelligent control

Chapters
Unfold

You Might Like

Recommended Posts

Beginner's guide to VERILOG
module led_variety(sys_clk,led); input sys_clk;//Input clock is 40MHZ output [7:0] led; reg [7:0] led; reg [24:0] count; reg [4:0] state; wire clk; always @ (posedge sys_clk) count<=count+1'b1; assign
zgyzgy FPGA/CPLD
There are too many electronic devices to charge at the same time, so why not DIY a desktop charging station?
I saw this desktop charging station on Station B. It looks pretty good. It can meet various charging needs. Are there any friends who are interested in DIYing it together?
木犯001号 Power technology
A DC-DC step-down circuit, the chip exploded at the moment of power-on.
As the title says, the chip XL4005E1 is used, and the voltage is converted to 12V, and the input voltage is about 25V. When the power is turned on, the chip XL4005E1 exploded. Please give me some advi
zhangjr Power technology
Research on Low Phase Noise Voltage Controlled Oscillator
Oscillators are widely used in the field of RF circuits with their various functions. Phase noise directly affects frequency stability, bit error rate and adjacent channel interference in phase-locked
ZYXWVU RF/Wirelessly
What should I pay attention to if I plan to make a station robot?
What other functions are there? Let's chat casually:congratulate:
天赐yi滴泪 Robotics Development
STM32 MCSDK motor start
HI seniorI use NUCLEOG431 + IHM08 to create a sensor FOC motor driver through MCSDK5.4.1. When the motor is started without rotating, the motor will run normally. However, when the motor is started wi
mathimportant Motor Drive Control(Motor Control)
Recommended Content
Web users are watching Change
MoreHot Articles

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号