Training

Location:Training / Webinar / Live playback: ST’s IO-Link-based environmental monitoring and predictive maintenance solution / Condition monitoring and predictive maintenance solutions based on IO-Link

Chapter 1：Condition monitoring and predictive maintenance solutions based on IO-Link

Duration：52 minutes and 50 seconds
Date：2021/07/14

Uploader：hi5

Introduction

keywords： STMicroelectronics sensor ST IO-Link Environmental monitoring

This live broadcast will introduce STMicroelectronics’ IO-Link master-slave transceiver products and reference designs, which can transmit and send data from STMicroelectronics’ smart industrial sensor nodes to the corresponding nodes or the cloud for processing, thereby achieving Environmental monitoring and predictive maintenance application scenarios.

You Might Like

Recommended Posts

Make a suggestion: I hope EEWORLD will set up a group and add all the members who bought Friendly Arm to the group. If you have any questions, you can communicate with each other. At the same time, Friendly Arm will pro; jxb01033016 Embedded System

FPGA Serial Communication: FPGA (EP1C3T144) serial communication I send any data received 00, I changed the device settings, set a configuration device EPCS1 on the FPGA, and set the unused input pin to tri-state, the result is; liujianhui Embedded System

Anyone got time to help me look at this?: /************************************************ Program function: MCU controls the buzzer to play the song "Wish you peace" ---------------------------------------------- Dip switch setting: turn th; shyatupc Microcontroller MCU

TMS320C6678 DSP software control: [size=4] TI has developed FusionDigital Power Designer software specifically for the UCD92xx series of chips. Because the UCD92xx series of power controllers have a dedicated integrated circuit inside; fish001 Microcontroller MCU

How to make the Zhongjiu brush line: How to make a Zhongjiu brush line to upgrade a small pot TV receiver, what materials are needed; wanghg127 Embedded System

Single chip microcomputer control of stepper motor: Abstract: This design uses the Lingyang 16-bit single-chip microcomputer SPCE061A to control the stepper motor. The square wave with timing output through the IO port is used as the control signal of; 呱呱 MCU

Recommended Content

Hot VideosMore

Hot ArticlesMore

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号