• You can log in to your eeworld account to continue watching:
  • branch current method
  • Login
  • Duration:13 minutes and 38 seconds
  • Date:2021/06/14
  • Uploader:老白菜
Introduction
01 Physical phenomena and circuit models in circuits, basic physical quantities in circuits

02 Resistance, capacitance, inductance components and characteristics

03 Digital multimeter to measure resistance

04 Independent power supply in the circuit, Kirchhoff's law

05 Kirchhoff's law micro course

06 Circuit Summary of the basic concepts and laws of circuits, exercise lesson (1)

07 Summary of the basic concepts and laws of circuits, exercise lesson (2)

08 Series and parallel equivalent transformation of resistors; star-angle transformation of resistors; equivalent transformation of power supply

09 Power supply The

equivalent transformation

of ​ ​ ​1) 16 Phasor representation of sinusoidal quantity (2), phasor form of basic circuit laws 17 Impedance and admittance 18 Phasor method solution of sinusoidal AC circuit 19 Power and calculation, power factor and improvement of sinusoidal AC circuit 20 Resonant circuit 21 Mutual inductance circuit (1) 22 Mutual inductance circuit (2) 23 Calculation of ideal transformer and circuit 24 Three-phase power supply and three-phase load 25 Calculation of three-phase power 26 Calculation of symmetrical three-phase circuit 27 Characteristics and analysis of asymmetrical three-phase circuit 28 Harmonic analysis of non-sinusoidal signals, harmonic analysis of non-sinusoidal signals effective value, average value, average power 29 Analysis of non-sinusoidal periodic current circuits 30 Dynamic process and dynamic response of the circuit 31 Determination of the initial conditions of the circuit 32 Solving the first order Three-element method of circuit dynamic response 33 Classification of first-order circuit response 34 Step response of first-order circuit 35 Laplace transform and its basic properties 36 Partial fraction expansion method of inverse Laplace transform 37 Complexity of linear circuits Frequency domain method to solve 38 Equations and parameters of two-port network (1) 39 Equations and parameters of two-port network (2) 40 Equivalent circuit of two-port network, cascade of two-port network 41 Nonlinear resistor components and their characteristics, Graphical method of nonlinear circuit 42 Small signal analysis method of nonlinear resistor circuit 43 Application of superposition theorem 44 Thevenin's theorem - determination of equivalent parameters of active two-terminal network 45 Simulation application: DC circuit analysis 46 Improvement of power factor 47 AC Mutual inductance in circuits 48 Measurement of three-phase circuits










































































Unfold ↓

You Might Like

Recommended Posts

Ask a question about programming F28027!!
Question: F28027 program burning problem! ! As follows: I had a plan to make a routine for upgrading the F28027 program, but later I found that the RAM space of F28027 was too small to accommodate my
aoxiaoche918 Microcontroller MCU
Design of electromagnetic wave wake-up function of MSP430 and CC1101
[color=#333333][font=Verdana, Helvetica, Arial, sans-serif][size=14.04px] With the rapid development of computer communication technology and the widespread application of the Internet, especially in
Jacktang Microcontroller MCU
Temperature sensor in psoc3
Hello everyone, is there any experiment related to the temperature sensor in psoc3?
dzgcsj10010 Sensor
Failed to establish socket, system resources are exhausted, what is the reason, how to deal with this?
FtpConnect SUCC! FTPLIB: socket fail, errno=55 FATAL ERROR! FAIL TO CREATE SOCKET, SYS SOURCE MAY BE NOT ENOUGH! FtpConnect SUC C! This message should mean that FTP has been established successfully,
396502099 Embedded System
Problems with accessing registers via memory addresses???
In AT89C51, the address of P0 is 0x80, sfr P0 = 0x80. I access the register in the following way, why does the value of address 0x80 remain unchanged? ? *(char *)0x80 = 0x22;
uoy1984 Embedded System
Wince Windows CE can communicate with PC via USB interface (do not want to use actviesync RAPI)
Connect the PC to the WinCE device via a USB (2.0) cable, and send data to the WinCE device in real time (or both parties transmit data). Do you have any good solutions? I have tried communicating via
dq043 Embedded System

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号