• Duration:45 minutes and 30 seconds
  • Date:2020/07/11
  • Uploader:桂花蒸
Introduction
An introduction to automatic detection technology, sensor principles and measurement circuits produced by Tongji University. Automatic detection technology is a comprehensive technology developed on the basis of the use, development, and production of instruments. It is also an important branch of automation science and technology. In this tutorial, we will learn the relevant knowledge of automatic detection technology.
Automatic detection technology is an important branch of automation science and technology. It is a comprehensive technology developed on the basis of the use, development, and production of instruments.
Automatic detection is carried out and completed automatically without any or only minimal manual intervention during the measurement and inspection process. Implementing automatic detection can improve the level and degree of automation, reduce human interference factors and human errors, and improve the reliability and operating efficiency of the production process or equipment.
1. Automatic detection tasks:
There are two main types of automatic detection tasks. One is to directly measure and display the measured parameters to tell people or other systems about the changes in the measured objects, that is, generally speaking, automatic detection or Automatic testing; second, it is used as the front-end system of the automatic control system to make corresponding control decisions and implement automatic control based on changes in parameters.
2. The main research contents of automatic detection technology:
The main research contents of automatic detection technology include measurement principles, measurement methods, measurement systems, and data processing.
3. Measurement system:
After determining the measurement principle and method of the measurement, it is necessary to design or select a device to form a measurement system. There are mainly two types: analog and digital.
1) Analog measurement system
The analog measurement system is composed of sensors, signal conditioners, display, recording devices and/or output devices.
2) Digital measurement system
The digital measurement system is composed of peripheral equipment such as sensors, signal conditioners, input interfaces, central processing unit components, output interfaces, and display records.
Unfold ↓

You Might Like

Recommended Posts

beaglebong black
[color=#333333][font=tahoma, arial, simsun]This board is a simplified version of BBB. Compared with the full version, it lacks eMMC, HDMI, USB and other components! The schematic diagram is the same a
又见冬日 Buy&Sell
About SIGNAL in PROCESS
LIBRARY IEEE; USE IEEE.STD_LOGIC_1164.ALL; USE IEEE.STD_LOGIC_UNSIGNED.ALL;ENTITY light ISPORT(clk,reset,sensor: IN STD_LOGIC;green_1,green_2,red_1,red_2,yellow_1,yellow_2 : OUT STD_LOGIC); END ENTITY
riscbbs Embedded System
ST-LINK, why not connecting?
I bought an STM32F030 board and an F072 board. Both boards have ST-LINK. I disconnected the jumper connecting the ST-LINK and the CPU on the board, and used the ST-LINK's SWDIO and SWCLK to connect to
dontium stm32/stm8
(Repost) Disassemble the Tesla battery pack and explore the black technology of the United States!
[i=s] This post was last edited by qwqwqw2088 on 2017-1-10 20:48 [/i] Stylish appearance, 0-100km/h acceleration of 3.2 seconds, and a range of 440km, these are the data that Tesla Model S shows to pe
qwqwqw2088 Analogue and Mixed Signal
Ask about the online programming of SMD microcontrollers
I am using PIC16F88, a SMD chip with only a programmer but no adapter. Now the microcontroller has been soldered to the board. I saw in the datasheet that the ICSP function requires the crystal to be
wblovesea MCU
Electronic Engineer Written Examination Materials Limited Time Free Points Download (Famous Company Real Questions + Basic Knowledge of Typical Positions)
[align=center][font=微软雅黑][/font][/align][font=微软雅黑] [size=4]The golden March and silver April, the recruitment season is here. Xiaoguan collected some interview and written test materials at the EE Do
高进 MCU

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号