The course aims to explain how MOS transistors work and how to model them. The knowledge provided in this course is essential not only for device modelers, but also for designers of high-performance circuits.
Industrial parts counter program: (starting from 0 to 999) GW equ 60h ; Units data buffer SW equ 61h ; Tens data buffer BW equ 62h ; Hundreds data buffer Mov GW,#0 ; Initialize all to 0 Mov SW,#0 Mov
If you have used XDS510 to emulate C2000, you can now refer to the following method to debug M3The Texas Instruments Stellaris microcontroller does not support a return TCK pin and most Stellaris boar
My friend brought me a single-chip microcomputer, which is a GPS wireless communication module. I saw an 89C51 chip inside. My friend asked me to help him read out the program in this single-chip micr
There is no better way than timed polling + state machine scanning keys. This framework supports short press, short press and release, long press, and long press and release recognition. Of course, wi
[size=5]I have never been exposed to radio frequency communication before, but I have studied it recently. The transmitting circuit is [/size]as shown in the figure above[size=5] The receiving circuit
Input voltage 1~1.5V output >8V, current <10mA, efficiency about 80%. I searched online, but there is no fixed boost chip. There are adjustable boost chips to 9V, but the efficiency is too low, only a