1. Hardware modification:2. Software modification:in order to disable the built-in DC/DC, write this in your ccfg.c:#define SET_CCFG_MODE_CONF_DCDC_RECHARGE 0x1 // Do not use the DC/DC during recharge
The paper describes a detailed three-dimensional temperature analysis that is integrated directly into the chip design flow and how it helps chip designers and architects better understand the tempera
[i=s]This post was last edited by Feihong Haojie on 2019-9-9 12:11[/i]Signal generators are often used as input signals of signal chains in analog circuit debugging. The actual performance of the circ
No matter how I reinstall the driver or turn off the digital signature, it still works. The board is msp430f5529 and the system is win7-64. I hope someone can help me solve this problem, or send me a
Apple started to support BLE 4.0 after IOS 6. iPhone 4s, iPod 5, iPad 3 and other later models began to embed BLE 4.0 hardware. Therefore, before development, please make sure that your development en