[align=left][color=rgb(73, 73, 73)][font=微软雅黑][size=4]Now, whenever you open the SoC original pcbLayout Guide, you will find that the corner angle of high-speed signal routing will be mentioned. They
I use STM32F103 to drive the T6963C screen to display numbers and Chinese characters, but garbled characters appear, which is very annoying.
program:
//---------------------------------------------
//
This article will use the lv_port_esp32 case as a template, plus Kaluga's adc_button case - button control of RGB multi-color light changes.
1. Kaluga's onboard buttons and LEDs
Kaluga has six buttons
I used a microcontroller to simulate IIC. I originally used AT24C12 to store data. SDA and SCL both used 10K pull-ups. The port was configured as open-drain output. There was no problem. Later, for so