This is a demo written by someone else that I saw on the Internet. It is for the most basic model mcf5307 of the Freescale Coldfire V3 series. You can refer to
[Qinheng RISC-V core CH582] development board does not have WCH-LINK on board. In order to facilitate debugging, I bought WCH-LINK. It arrived today and it took me more than ten minutes to get started
There are two ways to implement buttons: query and interrupt. The initial position is in InitBoard() in OnBoard.c.OnboardKeyIntEnable = HAL_KEY_INTERRUPT_ENABLE; //Interruption method//OnboardKeyIntEn
When using 51 to simulate PWM wave, why is there a problem in the program when for(i=0;iTimer 0 should also be running, won't that cause any problems?Please help me! Thank you!#include "reg52.h"sbit l
F149 has an internal DCO clock, a high frequency 8M, and a low frequency 32KHZ. I don't know which one to choose? I want to make an LCD display, which clock should I use? Which one should I use for th
I want to use the IPC routine to transfer the data in core 0 to core 1 after the data is calculated, and then continue some operations in core 1, and then transfer it to core 0 after the operations ar