• You can log in to your eeworld account to continue watching:
  • Architecture of a typical operating system
  • Login
  • Duration:11 minutes and 11 seconds
  • Date:2019/04/13
  • Uploader:抛砖引玉
Introduction
1. Master the basic concepts, functional components, system structure and operating environment of operating systems;
2. Be familiar with and apply the working principles, design methods and implementation technologies of operating systems, and understand representative and typical operating system examples (such as UNIX, Linux and Windows);

3. Understand the evolution process, development research trends, new technologies and new ideas of operating systems, lay a good foundation for subsequent study of related courses, and lay the foundation for subsequent career development.

Unfold ↓

You Might Like

Recommended Posts

runaway modprobe loop assumed and stopped
Hello, I am a beginner. When loading the YAFFS file system, the following error occurs: runaway modprobe loop assumed and stopped runaway modprobe loop assumed and stopped kmod: failed to exec /sbin/m
niuhaibing Embedded System
Help writing papers
Who can help me write an English paper on wireless power transmission? 2000 yuan for 7000 words. If you have any, please contact me. [email]zhangyc.2ck@163.com[/email]
yunchuan RF/Wirelessly
Is there a 0805 chip resistor package?
Newbie, looking for 0805 package, using AD13
蛋蛋111111 PCB Design
Differential amplifier circuit--Questions about single-ended output
I have a question when looking at differential amplifier circuits. Differential amplifiers eliminate temperature drift based on the symmetry of the circuit. Wouldn't it be meaningless if it were a sin
545934451 Analog electronics
Can I use the I2C interface with other sensors after turning on DMP on mpu6050? Will there be any conflict if we share them?
Can I use the I2C interface with other sensors after turning on DMP for mpu6050? Will there be conflicts if they are shared? Note: I use the 6050 with DMP turned on to enable the pedometer function. W
wumoo Sensor
Introduction to CAN, I2C, I2S, ISP, SSP bus
I found it online and thought it was good, so I’m sharing it here. I also downloaded MARK
ddllxxrr Microcontroller MCU

推荐文章

怎么看待汽车操作系统 2025年01月13日
操作系统 (OS) 是管理基于计算机的系统的所有硬件和软件所必需的,它是汽车行业的关键软件平台。本文重点介绍汽车操作系统策略的教程信息和一些观点。 每个操作系统在功能、程序大小、复杂性、开发工作量和硬件要求以及终身维护、支持工作量和成本方面都有很大差异。一个操作系统的范围可以从几千行代码的简单控制程序到Linux、macOS、iOS和Windows等主要操作系统的几千万行...
01_ARM学习准备工作 2025年01月08日
熟悉Tiny210开发 ARM9 - 2410 ARM11 - 6410 CortexA8 - Tiny210 CortexA15 ... 1. 开始进入到真正的嵌入式阶段 1.1. 理解一下我们要学的内容 启动过程 1、上电 2、从BIOS里读引导信息 3、bootloader:准备运行环境,引导操作系统 3、操作系统kernerl init 4、加载 操作...
激光雷达受到挑战!——NPS的超高清雷达操作系统(HROS)与AI雷达 2025年01月03日
硅谷初创公司Neural Propulsion Systems(NPS)推出了面向高级驾驶辅助系统(ADAS)提供商的超高清雷达操作系统(HROS™),利用先进的数学和人工智能(AI)算法,显著提高了雷达系统的探测范围和分辨率,能够在各种恶劣天气条件下提供前所未有的精度和响应能力。 NPS的HROS不仅挑战了现有激光雷达技术,还是向自动驾驶与汽车安全领域迈出的重要一步。...
基于linux操作系统下s5pv210板子的按键中断实验 2024年12月17日
首先,在做这个实验之前有三件事是要明确的: 1. linux下的中断实验不需要像裸机实验一样要自己写取消屏蔽,清除中断标志位的操作,系统会自动帮你完成; 2.中断号的申请我使用的是gpio_to_irq()这个宏,它会帮我们自动分配中断号,返回值为中断号; 3. 在每个板子配套来的内核代码大部分都是已经包含了按键中断驱动,如果想另自己写的按键中断驱动不与内核本身...

Recommended Content

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号