Occasionally, after the initial debugging is completed, customers may find that the display is sometimes not displayed during use . Usually, the reasons for this phenomenon can be found from the follo
1. Set the pin multiplexing register PINMUX8 and select the function of pin 3 as timer output. Note that this pin coincides with the SCL of I2C0.
(User Manual P203)
2. Set up the timer setup_TIMER0();
In view of the advantage of msp430 in low power consumption, I have to learn msp430 to increase my ability. Please recommend me a development board that is not too expensive.
I used TinyUSB to preliminarily implement the CDC protocol on the USB of esp32s3, ran the preliminary micropython code, was able to connect ESP32OpenMV with OpenMV IDE, and ran the lighting program th