Job Requirements:1. Execute RF test cases for TD-SCDMA Node B2. Organize and develop HW at board level RF test environment. 3. Responsible for the testing of HW Node B system. 4. Bachelor degree or ab
Through the cscript script inspection, it is found that Checked Build is False. Now I want to debug the driver. How can I make Checked Build True? 1) Is Checked Build an independent CD? 2) Or can I ju
I recently made a board, but the lines were too dense. I adjusted the spacing to 5 mil, but the PCB manufacturer said they couldn't do it. I was very depressed.
If the picture is shown, the .h files included in the .c file should be displayed normally, but now it is not displayed, and the compilation is normal. Please give me some advice! !
Dear experts, I am a beginner. I am using STM8S003F3 to debug hardware I2C. There are three devices on the bus, including STM8. When I reset the other two devices with MCU, I found that I2C was occupi
SPI's CPOL=0, CPHA=1, falling edge data is written from the controller to the chip, and rising edge data is read from the chip to the controller. The falling edge of the first clock writes the MSB of
Recruitment
京公网安备 11010802033920号
