I don't know what conditions should be met to add a "network" to this ChipWatcher. Sometimes I can't find it, and sometimes I can't add it after I find it. I don't know if it has been optimized away.
I want to test a batch of SMD capacitors. The rated voltage is 10V. Add 10 times the voltage, which is 100V. I tested it for 5 hours. The capacitors were directly connected to the capacitor clamps and
[i=s]This post was last edited by benny512 on 2015-1-6 18:59[/i] I recently bought a few TDA8543Ts, but I am afraid they are old. I would like to ask the experts how to use an oscilloscope to verify t
Now the new NAND Flash driver architecture MDD+PDD+FMD has abandoned the old partition driver mspart and MBR format, and adopted the concept of region+partition. The entire nand flash is divided into
In the circuit, clocks with opposite phases are used to trigger adjacent flip-flops. If the output of flip-flop FF1 passes through a combinational logic circuit and is connected to the input of flip-f
[i=s]This post was last edited by hehung on 2019-7-28 23:35[/i]I've had this board for a long time, but something delayed me for the past two weeks. I took it out this week and planned to have some fu