Recently, I used lpc4357 to drive a 7-inch screen with external SDRAM, using MT48LC4M32B2P. During the initialization process, because only EMC_CLK0 was used, only the CLK0 pin was configured LPC_SCU-
[i=s]This post was last edited by Mr. Lan on 2020-3-9 09:49[/i]The main controls are:
1.PLC, advantages: relatively mature technology, stable performance, low cost, simple programming
2. Single chip m
The size of the matrix is a function parameter. We want to apply for dynamic cache as a dynamic array, but many subsequent vector operations must be byte-aligned to be calculated, such as DSPF_sp_vecr
Does the Vgs of a high-power MOS or IGBT provide a negative voltage when it is turned off, which can speed up the turn-off speed of the tube? Does a device like IGBT require a "larger drive current" (
The ADC analog-to-digital converter is an important on-chip peripheral of the 430 microcontroller, and it is often needed in development. Based on the user manual and my personal learning experience,