Area Occupancy Detection Reference Design for mmWave Sensors

灞波儿奔

Area Occupancy Detection Reference Design for mmWave Sensors [Copy link]

This design demonstrates how TI mmWave sensor technology can be used for area occupancy detection to monitor an area of interest with a ±60 degree field of view (FOV) and a maximum range of at least 10 m. The IWR1443BOOST evaluation module (EVM) is used and a complete radar processing chain is integrated onto the IWR1443 device. The processing chain includes analog radar configuration, analog-to-digital converter (ADC) capture, low-level fast Fourier transform (FFT), and signal processing.

Demonstrates environmentally robust area occupancy detection using a single-chip mmWave sensor Detects intrusion of objects or people into an area of interest with up to 120 degrees FOV and a range of 0m to 10m The source code for the processing chain based on the mmWave Software Development Kit (MMWAVE-SDK) is provided below. Download Schematic 153)]PCB

DownloadBOM

Load Gerber fileGerber[ /size]

Download Design Guide Area Occupancy Sensing Reference Design Using mmWave Sensors

Download Design Guide

倾心思梦

Thanks for sharing!

alan000345

With such comprehensive sharing, it becomes much easier to make products.