I saw an evaluation video on Youku. The content is simple and informative, so I reposted it for technical exchange purposes only. I hope it can be seen by more hardware enthusiasts and electronics enthusiasts. I would like to thank the speaker. His Weibo information video contains, thank you, infringement and deletion.
When selecting BLDC driver chips, I see that many new ones are sensorless. Can this type of sensorless type completely replace sensor-based chips? What are the advantages and disadvantages of each typ
Continue from the previous post: https://en.eeworld.com/bbs/thread-1155646-1-1.htmlDescription of the software part:In addition to writing and debugging their own software, software engineers are also
The circuit is designed according to the manual. The PB14 pin is set as the enable pin, the input level is 3.3V, and LEDK and LEDA are connected to the LCD driver pins. When the power is turned on and
Is the baud rate for communication between microcontrollers set in advance? Or calculated? Also, why does the crystal oscillator havea value of 11.0592M? Common frequencies are 4M, 8M, 12M, 16M, and 2
The P3-80-08K40 this time is higher-end than the S2-12-02K40 I disassembled last time.
It supports 8192 pixels, S2-12-02K40 is 2048 pixels
Maximum frame rate 33.7KHz, S2-12-02K40 is 18KHz
Supports 8-b
From: https://blog.adafruit.com/2020/07/03/ci ... -released/This is the first Alpha release of CircuitPython 6.0.0. It is a renumbered version of 5.4.0 as the i2cslave module and class have been renam