In addition to the high cost, the yield rate of roll-up screen mobile phones is low, which is also an important factor that keeps the product price high. "Although the roll-up screen is expected to be mass-produced in the next two or three years, the difficulty of mass production is estimated to be similar to that of the folding screen, and the overall yield rate may not be very high. The main reason is that it has not yet been mass-produced, and production requires a yield rate increase. Relatively speaking, the folding screen has gone through this process." The above person emphasized.
However, OPPO officials are optimistic about the yield rate. OPPO hardware structure engineer Jin Xiang pointed out that the OPPO X 2021 scroll screen concept phone can currently reach the level of 100,000. Calculated based on 50 times of opening and closing a day, the product can be used for 50 years, and 100,000 times is not the limit, and it is still under testing.
In addition, another difficulty faced by scroll screen phones is the support problem behind the screen. When the scroll screen is unfolded, it is necessary not only to ensure the smoothness and stability of the picture, but also to ensure that the force generated by the user's touch can be stably supported. If there is no stable support solution, the screen will be greatly damaged.
Industry insiders pointed out that folding screens and rollable screens are essentially flexible screens. Although rollable screen phones will not have crease problems, they are restricted by the immaturity of CPI and UTG cover technology. The products currently released are also a compromise between body portability and as large a screen size as possible. There is no better solution yet.
As mentioned earlier, although creases and heavy volume are effectively avoided, issues such as price, yield, screen support, and software adaptation all hinder the mass production of scroll screens. However, with the maturity of upstream material technology and the gradual improvement of flexible screen yields, scroll screens with both small size and large display area are likely to be a new trend in the development of mobile phone screens in the future. Looking to the future, the form of "future mobile phones" based on flexible screen technology will not stop there.
Previous article:Apple releases macOS Big Sur 11.3 beta with improved iOS/iPadOS app experience
Next article:Samsung OLED has not obtained US supply license, Huawei MateX2 folding screen is supplied exclusively by BOE
- Apple faces class action lawsuit from 40 million UK iCloud users, faces $27.6 billion in claims
- Apple and Samsung reportedly failed to develop ultra-thin high-density batteries, iPhone 17 Air and Galaxy S25 Slim phones became thicker
- Micron will appear at the 2024 CIIE, continue to deepen its presence in the Chinese market and lead sustainable development
- Qorvo: Innovative technologies lead the next generation of mobile industry
- BOE exclusively supplies Nubia and Red Magic flagship new products with a new generation of under-screen display technology, leading the industry into the era of true full-screen
- OPPO and Hong Kong Polytechnic University renew cooperation to upgrade innovation research center and expand new boundaries of AI imaging
- Gurman: Vision Pro will upgrade the chip, Apple is also considering launching glasses connected to the iPhone
- OnePlus 13 officially released: the first flagship of the new decade is "Super Pro in every aspect"
- Goodix Technology helps iQOO 13 create a new flagship experience for e-sports performance
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Sun goods + 2 sets of Wei Dongshan suits
- Analog electronics elective test + DC and AC parameters
- Can anyone confirm what device this is? Thanks!
- Welcome to the 5G era: There are countermeasures for mobile phone antenna design
- EEWORLD University - Solar System Design Made Simple
- EEWORLD University ---- Medical monitoring and wearable devices
- Photodetector Array Signal Processing
- Application of wireless power transmission technology in underwater transmission
- EEWORLD University Hall----Live Replay: ST's IO-Link-based environmental monitoring and predictive maintenance solutions
- FAQ_About the pulse problem when the output port of BlueNRG-2 remains at a low level in low power mode