Nokia 6.3/6.4 renderings exposed: with water drop-shaped notch screen + circular rear quad camera

Publisher:开元轩Latest update time:2021-01-10 Source: cnBetaKeywords:Nokia  6 Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere

       The rumored Nokia 6.3/6.4 will arrive in the first half of 2021 (expected to be released no later than April), but the relevant renderings have been exposed on the Internet. It can be seen that it follows the design style of Nokia 6.2, with a water drop-shaped notch screen (single front camera) + rear ring quad camera (flash located at the bottom). In addition to the volume adjustment/power button, there is also a Google Assistant smart assistant summoning button.


  91Mobiles pointed out that Nokia 6.3 was expected to debut earlier along with Nokia 7.3 / 9.3 PureView. However, due to unknown reasons, the release date of the phone has been postponed again and again.

  But now, well-known whistleblower @OnLeaks has shared detailed renderings of Nokia 6.3/6.4 through Voice, which will certainly look familiar to old users (very similar to the Nokia 6.2 released in 2019).


  HMD Global's naming is a bit confusing, but the tipster still confirmed the model names of Nokia 6.3 / 6.4. It can be seen that the frame of the body is slightly thick, but the green color is very pleasing to the eye.

  On the right side of the body is the volume adjustment/power button with integrated fingerprint sensor, another large button is probably the Google Assistant smart assistant summoning button, and the SIM card tray is located on the left side of the body.


  The top has a 3.5mm audio/secondary microphone opening, the bottom has a USB-C charging/data port, the main microphone, and a speaker grille. The back has a centrally located ring camera module and an LED flash directly below it.

  Rumor has it that Nokia 6.3 is equipped with a 6.45-inch flat screen, with a width, height and thickness of 76.8×164.9×9.3 mm (10.1 mm including the rear camera bump).


  The phone is expected to be equipped with Qualcomm Snapdragon 760 chipset, and the Zeiss-branded rear quad-camera is a combination of 24MP main camera + 12MP ultra-wide angle + 2MP depth sensor + macro lens.

  Although HMD Global has not yet disclosed the exact price and release date, @OnLeaks expects it to arrive no later than April.


Keywords:Nokia  6 Reference address:Nokia 6.3/6.4 renderings exposed: with water drop-shaped notch screen + circular rear quad camera

Previous article:Low capacity utilization and unsalable products make it difficult for Royole Technology to solve its performance loss problem
Next article:Microsoft's new patent reveals that the Surface phone will have a more powerful foldable screen

Recommended ReadingLatest update time:2024-11-16 15:01

Implementation and application of MODBUS protocol based on Cortex-M3
As a non-contact non-destructive flaw detection technology, magnetic flux leakage detection has the characteristics of fast detection speed, high sensitivity, no coupling agent, and easy automation. It is a key research direction of rail flaw detection technology. In order to solve the experimental simulation problem i
[Microcontroller]
Implementation and application of MODBUS protocol based on Cortex-M3
The global leader in 3D chips and modules has entered the Chinese market with a strong presence
Inuitive Microelectronics launched the "3D Machine Vision Module C158", based on 3D vision + SLAM + AI algorithm, to provide the robotics industry with the world's most advanced 3D machine vision products The world's most advanced on-chip 3D depth perception engine, with a depth resolution of up to 12
[sensor]
The global leader in 3D chips and modules has entered the Chinese market with a strong presence
Smart Home 3.0 Era Needs 5 Basic Features
The smart home 3.0 era needs to have five basic characteristics: 1. A home network that acts as a nerve network for your home 2. Can be connected to the Internet 3. Various services that can be provided through this network 4. System customization 5. Intelligence at both ends: cloud intellig
[Embedded]
What are the differences between VR, AR and naked-eye 3D?
VR (Virtual Reality), AR (Augmented Reality) and Glasses-free 3D (3D without glasses) are three important concepts in the field of modern science and technology. Although they are all related to the perception of the real world, there are many differences between them. This article will introduce the definitions, wo
[Embedded]
Application of ARM processor S3C4480 in the design of high-precision DC switching power supply
0 Introduction In recent years, embedded technology has developed very rapidly. Highly integrated processors with single-chip microcomputers and dedicated embedded ARM as the core have emerged and have been widely used in the fields of communication, automation, power electronics, etc. The power supply industry has a
[Microcontroller]
Application of ARM processor S3C4480 in the design of high-precision DC switching power supply
STM8S003F3 uses TIM1_CH1 and TIM1_CH2 to configure PWM output
A recent project used the small MCU STM8S003F3. When using TIM1_CH1 TIM_CH2 as PWM output, I encountered a problem. After the code was downloaded, there was no PWM output. Using an oscilloscope, it should be that there is no PWM output. First I searched for information online and read the official examples, and I fel
[Microcontroller]
STM8S003F3 uses TIM1_CH1 and TIM1_CH2 to configure PWM output
Despite the pandemic, Apple plans to increase iPhone production by 4% by March 2021
On April 21, Japanese media reported that Apple has informed several suppliers that it plans to produce about 213 million iPhones in the 12 months ending March 2021, a 4% increase from the same period last year, although some suppliers believe that orders may eventually be significantly reduced.   Apple has closed mos
[Mobile phone portable]
Despite the pandemic, Apple plans to increase iPhone production by 4% by March 2021
With a total investment of 2.026 billion yuan, the Changtu Rongke Energy Storage Equipment Manufacturing Project is striving to sprint in the fourth quarter. It is expected that the equipment will be installed in March 2025 and put into production in September
The entire construction team of the Rongke Energy Storage Equipment Manufacturing Project is working hard to seize the critical window period and sprint to the fourth quarter, laying a solid foundation for the production next year. Picture Walking into the construction site of the Rongke Energy Storage Equipment Manufa
[New Energy]
Latest Mobile phone portable Articles
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号