What is the core technology of electric vehicle electric drive system?

The electric drive system mainly consists of three parts: motor, motor control unit and reducer:

Most of the time, user needs determine the direction of product technology evolution.

The core requirements of people for power units are nothing more than:

①The response should be fast and the power should be strong;

②High efficiency and low energy consumption;

③Low failure rate, durable, stable and reliable.

More potential needs are:

① The integration is high enough to free up more space in the car and in the front and rear trunks; ② The cost is reasonable (which will eventually be reflected in the price of the car); ③ No annoying howling at high speeds;

The figure below summarizes the core elements of an electric vehicle power unit. In fact, the technology and evolution of the electric drive system revolve around these aspects.

1. The motor power is currently sufficient, and the potential and necessity of squeezing are not great

In terms of the most important attribute of electric drive, "power", most electric vehicles currently have excess power. Take the 36w+ Tesla Model 3P as an example. Its acceleration can beat a performance gasoline car of around 200w in seconds. The 3w Hongguang MiniEV's starting acceleration is even more direct than many gasoline cars.

△ Power parameters of some high-performance motors

In other words, the power of electric motors is sufficient for most electric vehicles at present, and the high horsepower premium of traditional gasoline vehicles has become worthless in electric vehicles. The high power density motors listed in the above figure give people the feeling that the horsepower of electric vehicles is given for free...

Instead of spending huge amounts of money on developing new power platforms and improving power parameters based on the existing more than sufficient motor power, car companies would be better off spreading the costs to other areas that users can feel more.

△ ModelS Plaid and Lucid Air Sapphire Edition parameter comparison

Of course, there are a few performance electric cars that pursue absolute power acceleration, such as Tesla Model S Plaid, Lucid Air sapphire, Hummer EV, Porsche Taycan Turbo S and other models.

There are some new key technologies to improve power:

For example, methods such as flat winding coils, end transposition to increase slot fill rate, and optimization of rotor structure can be used to increase magnetic fill rate and further improve motor power and power density.

In recent years, more and more car models have been equipped with direct waterfall oil-cooled motors, which make motor cooling more efficient and help ensure continuous power output without attenuation.

There are also intelligent algorithms that optimize motor power output to achieve better power, energy consumption, and stable control.

Personally, I think the above technologies are all core electric drive technologies!

2. The energy efficiency of motors has reached a bottleneck, and improving energy efficiency requires the application of silicon carbide

Based on the premise in Part 1 that motor power is sufficient or even excessive for most users, the following figure is a motor energy efficiency map. It can be clearly seen that in most daily speed ranges, the motor's energy efficiency is above 90%.

Moreover, the best energy efficiency of motors installed in most new energy vehicle models is currently between 90% and 95%, and some high-efficiency motors have even reached 96%. At this time, if you want to continue to improve the motor efficiency on the existing basis, the cost will increase exponentially, which is not so cost-effective for both car companies and users.

△ Energy efficiency MAP diagram of a motor

Therefore, improving the energy efficiency of the main inverter in the motor control unit has become a new direction for improving the energy efficiency of the entire electric drive system.

That is to replace the current mainstream IGBT modules with SiC silicon carbide modules!

△ Advantages of Silicon Carbide Materials

Silicon carbide SiC MOSFET has many advantages, including small size for packaging and integration, fast switching/conduction response and lower loss, high voltage resistance (10 times that of silicon-based), high thermal conductivity for heat dissipation, and higher power density.

△ Analysis of the advantages of silicon carbide

The most important thing is the motor control unit using SiC silicon carbide modules. Compared with the IGBT module solution, it can achieve an efficiency improvement of about 5% from the battery to the motor path, which means that it can save about 5% of the energy consumption of the entire vehicle.

Compared with the battery cost corresponding to the 5% increase in battery life used by car companies, and the negative impact of increasing the weight of the vehicle, even the silicon carbide module, which currently has a higher cost than IGBT, is the best choice!

△ Tesla Model 3 inverter uses 24 SiC modules

In addition, compared with IGBT, silicon carbide has the advantage of being more resistant to high voltage (above 1,000 volts), and is more suitable for the 800V electrical architecture that more new energy vehicle models will be equipped with in the future. It is not only used in the main inverter, but can also be applied to high-voltage charging piles, high-voltage battery packs, OBC chargers, and DC-DC converters. It will have a greater place to be used and can further improve the energy efficiency and charging experience of the entire vehicle!

△ Application of silicon carbide devices in new energy vehicles

Here I would like to give special praise to the domestic brand BYD. BYD is the only car company in the world that has achieved self-developed and self-produced silicon carbide devices!

3. Integration has great potential and is the general trend. Cross-system integration capabilities will be the core technical competitiveness and provide higher user value!

The above mainly discusses the upgrade and optimization of individual components of the electric drive system. The all-in-one integration of electric drive system components is currently the general trend in the industry!

The highly integrated electric drive system has many advantages:

Greatly save volume and weight, reduce overall BOM cost, improve integrated assembly efficiency, and increase the overall power density of the electric drive system...

The value to users lies in that the small size saves more layout space, resulting in larger interior space and front and rear trunk volumes; reduced weight means longer mileage with the same amount of power; at the same time, BOM cost reduction also indirectly reduces users' purchase costs.

The evolution history of electric drive systems can be roughly divided into three stages:

From 2015 to 2017, there were three separate components. From 2018 to 2020, three-in-one became the mainstream. From 2021 to now, there is an integrated stage of all-in-one.

The figure below summarizes the evolution of the electric drive system, which is more intuitive and easy to understand!

△ The evolution of electric drive system development

Although all-in-one is just a combination of components from multiple systems, system integration across components and fields is a test of technical and engineering capabilities. Currently, only a few large companies with accumulated experience can do it.

Compared with motor power improvement and energy efficiency optimization, the comprehensive benefits brought by all-in-one integration will be more obvious, and it is undoubtedly one of the most important core technologies of new energy vehicle electric drive systems!

4. Some final thoughts

As can be seen in the article, China's new energy vehicles have overtaken the world in the past five years, whether in the fields of batteries, electric drives, core components, and core technologies, and have actually been at the forefront of the world with remarkable results, which is exciting!

As far as the field of electric drive systems is concerned, Tesla and Lucid are relatively leading in this field among foreign car companies. Bosch, Continental, BorgWarner, ZF and other Tier 1 companies have many products and layouts, but our domestic companies such as BYD, Huawei, Jingjin, NIO XPT and others also have a lot of know-hows, and are even half a step ahead.

The increasingly mature and complete domestic new energy vehicle supporting ecosystem will become an important driving force for the rise of domestic new energy vehicles and their leading position in the world.

It is foreseeable that as the penetration rate of new energy vehicles continues to increase, domestic new energy vehicles will continue to replace slow-moving joint venture/foreign brands, while breaking the premium of joint venture/foreign brands and seizing more market share!