The SM-H2V1 is a video converter that allows you to connect HDMI video sources (such as laptops, desktop computers, tablets, etc.) to VGA output devices (such as projectors, LCD screens, etc.) without upgrading the display device to the HDMI interface. It supports up to 1920x1080 video resolution. The SM-H2V1 is lightweight and easy to install. No software needs to be installed. You only need to connect the hardware device to complete the installation. In addition, the SM-H2V1 can be used without an external power supply, providing plug-and-play, light and easy to carry, and easy to store. It is suitable for briefing scenarios in conference rooms.
Product Introduction:
This product is a portable digital-to-analog conversion cable that can convert the input of HDMI high-definition signal source into VGA video output through the standard definition. Product application: Computer/DVD/digital set-top box/notebook/mobile phone/digital camera/digital video camera/tablet computer/multimedia player/and other series of high-definition signal source input devices. It can convert the video signal to the output of TV/monitor/projector and other products. Thus, it solves the display device connection solution that is easy for users to operate.
Product Features:
◇Convert HDMI signal to VGA output
◇Support the conversion from digital signal to analog signal
◇Support HDCP 1.0/1.1/1.2
◇Quick installation, simple operation, no need for settings
◇Built-in conversion chip, supports hot swap.
◇HDMI video input format: 480i/576i/480p/576p/720p/1080i/1080p
◇VGA video output format: 480i/576i/480p/576p/720p/1080i/1080p
◇Does not support audio output
Previous article：Shuomen HDMI to VGA Laptop Desktop Host HDMI to VGA Adapter
Next article：How to implement a design example of audio signal detection
- Popular Resources
- Popular amplifiers
CVPR 2023 Paper Summary: Efficient and Scalable Vision
ICL7650CPA-1
- Huawei's Strategic Department Director Gai Gang: The cumulative installed base of open source Euler operating system exceeds 10 million setsOn November 15, the first AI native open source operating system openEuler, openEuler 24 03 LTS version, was officially released on June 6 this year. ...
- Analysis of the application of several common contact parts in high-voltage connectors of new energy vehiclesIntroduction: Connectors are used in every car. The device uses electrical, optical and other signals to control the corresponding mechanical force to connect, disconnect and convert, thereby realizing the corresponding circuit or optical channel conversion. ...
- Wiring harness durability test and contact voltage drop test methodBased on the QC T 29106-2014 standard, this paper proposes a new durability characteristic test and contact voltage drop test method, and conducts experimental verification on these two test methods. ...
- Sn-doped CuO nanostructure-based ethanol gas sensor for real-time drunk driving detection in vehiclesMetal oxides and their composites with other materials (such as MXenes and metal chalcogenides) can be used to achieve different ...
- Design considerations for automotive battery wiring harnessThe battery is one of the power sources of the car. When the generator stops working and the engine is started, all the power is output from the battery. When the engine is idling or working at a low speed, the power generation of the generator cannot meet the demand. ...
- Do you know all the various motors commonly used in automotive electronics?
- What are the functions of the Internet of Vehicles? What are the uses and benefits of the Internet of Vehicles?
- Power Inverter - A critical safety system for electric vehicles
- Analysis of the information security mechanism of AUTOSAR, the automotive embedded software framework
Professor at Beihang University, dedicated to promoting microcontrollers and embedded systems for over 20 years.
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Has anyone used the LTC2941 single-cell fuel gauge? Is the ground terminal of the LTC2941 connected to the negative terminal of the battery B- or the GND of the circuit board?
- [NXP Rapid IoT Review] +3. Rapid IoT Studio online IDE Test 1 - BLE control indicator
- First experience with the domestic RISC-V development board RV-STAR
- How to calculate clock pulse width from sampling rate of serial ADC?
- Wireless Condition Monitor for Motors and Pumps Using Multi-Axis Vibration
- Verification of the difference between & and && operators in C language
- After the power supply common mode surge protection, the power supply output voltage rises instead of falling
- Disturbance-free continuous power supply solution (disturbance-free quick switching with anti-sway module)
- Power supply obstacle" + electromagnetic interference and inductive howling
- Install an N102 on STM32F103 and experience NB-IoT development at home
京公网安备 11010802033920号