According to foreign media reports, in order to further improve vehicle and road safety, DAF Trucks, a well-known European commercial vehicle manufacturer, has launched an upgraded AEBS (Automatic Emergency Braking) system for the LF, CF and XF full series of models: AEBS-3. This third-generation advanced emergency braking system can fully realize automatic emergency braking to help avoid collisions with stationary vehicles and moving vehicles at speeds of up to 80 km/h, and this safety system is combined with the adaptive cruise control system (ACC) and forward collision warning (FCW) system.
(Image credit: DAF Trucks)
In the next generation of AEBS, DAF Trucks uses a high-precision dual radar with 16 antennas (previously 7) for close and long-range detection. And the system is equipped with the best long-range sensor in the industry, with a detection range of up to 250 meters (previously 200 meters), so that potentially dangerous situations can be identified earlier. The system has an unparalleled 120-degree (previously 50-degree) close-range viewing angle, which enables earlier detection even in adverse weather conditions such as fog and low light, as well as in low visibility.
(Image credit: DAF Trucks)
emergency pull over
The AEBS system works with the vehicle's braking and stability control systems to provide the driver with instructions to react to an impending potential collision through audible and visual alerts and firm haptic brake pulses. If the driver does not react, the truck automatically initiates emergency braking to avoid or mitigate the effects of a rear-end collision.
(Image credit: DAF Trucks)
Top speed: 80 km/h
AEBS-3 features fully autonomous emergency braking to help avoid collisions with stationary and moving vehicles at speeds up to 80 km/h. Therefore, if the driver is not aware of the hazardous situation, AEBS-3 will automatically reduce the speed of the vehicle's impact with a moving or stationary object in front as much as possible.
AEBS-3 is standard on all DAF LF, CF and XF truck models. The introduction of the more advanced AEBS-3 system once again demonstrates DAF Trucks’ outstanding capabilities in ensuring safety.
Previous article:Zhejiang Hydrogen Valley successfully manufactured the first automatic transmission for new energy vehicles
Next article:US algorithm helps autonomous vehicles reduce braking, saving 8% to 23% energy
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Can sensorless drive completely replace sensory drive?
- Motor drive development communication 3: Software component description
- MP3302DJ chip drives 640*480 LCD screen heating problem
- Is the baud rate for communication between microcontrollers set in advance? Or calculated? Also, why does the crystal oscillator have 11.0592...
- GigaDevice GD32L233 Review Summary
- CircuitPython 7.0.0 alpha3 released
- DALSA P3-80-08K40 Line Scan Camera Teardown
- CircuitPython 6.0.0 Alpha 1 released
- [Hua Diao Experience] 19 Hezhou ESP32_C3 lights up WS2812B hard screen
- I have a problem with the wire pulling. Version 21. Please help me.