OK6410 starts the configuration process (details)-EEWORLD

Collect

Hardware platform: OK6410 development board

U-Boot 1.1.6 (Sep 19 2014 - 10:00:03) for SMDK6410

****************************************

** u-boot 1.1.6 **

** Updated for OK6410 TE6410 Board **

** Version (2012-09-23) **

** OEM: Forlinx Embedded **

** Web: http://www.witech.com.cn **

****************************************

CPU: S3C6410 @532MHz

Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode)

Board: SMDK6410

DRAM: 256 MB

Flash: 0 kB

NAND: 1024 MB

In: serial

Out: serial

Err: serial

Hit any key to stop autoboot: 0

NAND read: device 0 offset 0x500000, size 0x500000

5242880 bytes read: OK

Boot with zImage

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Linux version 3.0.1 (root@ubuntu) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #676 Fri Sep 19 10:39:58 CST 2014

Ignoring unrecognised tag 0x54410008

camera: no parent clock specified

Kernel command line: root=/dev/mtdblock2 rootfstype=yaffs2 init=/linuxrc console=ttySAC0,115200

Memory: 196660k/196660k available, 65484k reserved, 0K highmem

Virtual kernel memory layout:

vector : 0xffff0000 - 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

DMA : 0xff600000 - 0xffe00000 ( 8 MB)

vmalloc : 0xd0800000 - 0xf4000000 ( 568 MB)

lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)

pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

.init : 0xc0008000 - 0xc0036000 ( 184 kB)

.text : 0xc0036000 - 0xc07d4434 (7802 kB)

.data : 0xc07d6000 - 0xc082eaf0 ( 355 kB)

.bss : 0xc082eb14 - 0xc08b1124 ( 522 kB)

SCSI subsystem initialized

------------[ cut here ]------------

WARNING: at drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x58/0x124()

---[ end trace da227214a82491b7 ]---

type=2000 audit(0.190:1): initialized

Hello, world

Creating 4 MTD partitions on "NAND 2GiB 1,8V 8-bit":

0x000000000000-0x000000200000 : "Bootloader"

0x000000500000-0x000001e00000 : "Kernel"

0x000001e00000-0x00000e600000 : "File System"

0x00000e600000-0x000040000000 : "User"

mcp2515 spi1.0: MCP251x didn't enter in conf mode after reset

mcp2515 spi1.0: probe failed

dm9000 dm9000.0: read wrong id 0x01010101

s3c_g2d_probe called

s3c_g2d_probe Success

Registering the dns_resolver key type

FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

Try to bring eth0 interface up......Done

Starting Qtopia2, please waiting...

Please press Enter to activate this console. touch...

[root@FORLINX6410]#

Keywords：OK6410 Reference address：OK6410 starts the configuration process (details)

Previous article：OK6410 development board startup process (detailed information)
Next article：g_oalAddressTable table in wince bsp

Popular Resources
Popular amplifiers