Design of intelligent test system based on an 80C51 microcontroller

Publisher:SerendipityJoyLatest update time:2024-03-14 Source: elecfansKeywords:80C51 Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere

Currently, the intelligent test system implemented in this design is undergoing the second phase of development. It is planned to introduce the intelligent test system to aging testing and factory serial number management. After successful development, the performance of the system will be greatly improved and the scope of application of the system will be improved.


[1] [2]
Keywords:80C51 Reference address:Design of intelligent test system based on an 80C51 microcontroller

Previous article:High-precision, high-stability, high-resolution radio frequency sine wave signal generator based on DDS device design
Next article:The structure and working principle of the timing counter of 80C51 microcontroller

Recommended ReadingLatest update time:2024-11-16 11:53

17.EEPROM (IIC bus)
Composition and working principle of IIC serial bus The use of serial bus technology can greatly simplify the hardware design of the system, reduce the size of the system, and improve reliability. At the same time, the system can be easily modified and expanded. Commonly used serial expansion buses include: IIC (Int
[Microcontroller]
17.EEPROM (IIC bus)
The interrupt response process of 80c51 microcontroller
    Interrupt Response     Interrupt response is the acceptance of the interrupt request from the interrupt source by the single-chip CPU. After the interrupt request is responded, it goes through a series of operations and then turns to the interrupt service routine to complete the processing task required by the int
[Microcontroller]
80C51 microcontroller serial communication
1. Basic knowledge of serial communication Asynchronous communication and synchronous communication There are two ways of computer data transmission: parallel data transmission and serial data transmission. The characteristics of parallel data transmission: all data bits are transmitted simultaneously, with fast tra
[Microcontroller]
How to perform serial communication between two 80c51 microcontrollers
I used to think that serial communication can only be done between a microcontroller and a PC. Yesterday, I accidentally saw a program that can be used to communicate between microcontrollers. This little thing is really amazing! I spent a long time trying to figure it out yesterday, but today, with the help of a gr
[Microcontroller]
Standard 80C51 MCU emulates I2C bus host program
I2C bus protocol program When I was making the program, I found Zhou Ligong's program on the Internet. I felt it was pretty good, so I reposted it. When using it, you must pay attention to the issues of sequence and time.   "i2c.h file" //I2C bus integrated sending function, sending multiple bytes of data to the slave
[Microcontroller]
Standard 80C51 MCU emulates I2C bus host program
Design of Intelligent Electricity Meter Based on 80C51 Single Chip Microcomputer
 The promotion and use of smart meters is a livelihood project that benefits the people. It has greatly improved the electricity conditions of rural residents, improved the automation level of distribution networks, and has great significance for reducing the consumption of electric energy. The single-chip microcompute
[Microcontroller]
Design of Intelligent Electricity Meter Based on 80C51 Single Chip Microcomputer
Latest Microcontroller Articles
  • Download from the Internet--ARM Getting Started Notes
    A brief introduction: From today on, the ARM notebook of the rookie is open, and it can be regarded as a place to store these notes. Why publish it? Maybe you are interested in it. In fact, the reason for these notes is ...
  • Learn ARM development(22)
    Turning off and on interrupts Interrupts are an efficient dialogue mechanism, but sometimes you don't want to interrupt the program while it is running. For example, when you are printing something, the program suddenly interrupts and another ...
  • Learn ARM development(21)
    First, declare the task pointer, because it will be used later. Task pointer volatile TASK_TCB* volatile g_pCurrentTask = NULL;volatile TASK_TCB* vol ...
  • Learn ARM development(20)
    With the previous Tick interrupt, the basic task switching conditions are ready. However, this "easterly" is also difficult to understand. Only through continuous practice can we understand it. ...
  • Learn ARM development(19)
    After many days of hard work, I finally got the interrupt working. But in order to allow RTOS to use timer interrupts, what kind of interrupts can be implemented in S3C44B0? There are two methods in S3C44B0. ...
  • Learn ARM development(14)
  • Learn ARM development(15)
  • Learn ARM development(16)
  • Learn ARM development(17)
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号