In the previous chapters, I created an ARM Resource Group and then created an Azure Storage Account under this ARM Resource Group.
In this chapter, I will introduce how to create a virtual machine network in ARM mode.
1. First, log in to the Azure New Portal at: https://portal.azure.cn/
2. Select More Service, then select Virtual Networks. (Note, not Virtual Networks Classic)
3. The page jumps, and then we click the Add button. As shown below:
4. Create an Azure ARM Virtual Network with an Address space of (10.0.0.0/22, with 1024 valid addresses).
Then create a subnet Subnet-1, with Address Range /24, and select the Resource Group we created earlier.
5. After the creation is complete, we select the LeiARMVNet created above, and then add a Subnet. As shown below:
6. After creation, it will look like the following figure:
Previous article:Azure ARM (8) ARM Template - VS Code
Next article:Azure ARM (10) Differences between ARM-based virtual machines and Classic Model virtual machines
Recommended ReadingLatest update time:2024-11-16 13:39
Professor at Beihang University, dedicated to promoting microcontrollers and embedded systems for over 20 years.
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- I'm new to power supplies, some power chips have multiple output SWs, how do I connect them?
- Homemade super mini writing robot (including schematics, PCB, firmware code, mechanical drawings)
- Using a fuel gauge chip to achieve fast and intelligent charging of dual-series lithium batteries
- FAQ_How to solve the problem of drastic jumps in the ADC sampling of BlueNRG-12
- Matrix keyboard program problem
- [GD32L233C-START Review] (4) LPTIMER wake-up trigger ADC in Sleep low power mode
- DSP Math Library - TMS320C55x DSP Library
- Qorvo helps Murata launch small UWB module to enable low-power IoT devices
- Ding~ It’s time to punch in on the first day of work after the holiday~Are you regretting that the holiday is not long enough or are you touched that you can finally start working again?
- How does Arteli AT32 MCU use on-chip Flash to implement EEPROM function?