Features of LED portable dual light source rechargeable flashlight-EEWORLD

Collect

A brand-new concept of dual-light source rechargeable portable flashlight, with CPU computer programming control, which makes the reliability, functionality and durability of the product far ahead of similar products.

It uses high-quality large-capacity nickel-hydrogen batteries (equivalent to 10 times the capacity of mobile phone batteries), and can illuminate with LED light source for about 6 to 12 hours on a single charge.

Multi-stage intelligent pulse charging, equipped with a variety of charging protection functions, strong charging stability and safer.

It uses 45 ultra-bright white LED lighting sources, with soft brightness at close range, good visual effect, more power saving, and long LED life.

On a single charge, the LED light source can illuminate with strong light (45 LEDs are all on) for about 6 hours; and with weak light (23 LEDs are on) for about 12 hours. 2 levels of dimming to meet different lighting needs.

The independent incandescent light rechargeable flashlight uses Philips xenon bulbs, and can continuously illuminate with white light for about 12 hours on a single charge. Adjustable spotlight and scattered light. When spotlighting at night, the brightness can read documents at 80 meters.

A special aviation waterproof charging plug is used to ensure that the charging jack is waterproof.

The spare bulbs (2 pieces) are installed behind the reflector of the lamp. The spare bulbs are carried with the lamp for easy replacement.

The car charging cable delivered with the lamp can be charged with a 12V car cigarette lighter.

All interfaces are equipped with waterproof seals to ensure waterproofing in any situation.

The shell is made of imported bulletproof PC material, which is heat-resistant and drop-proof.

Keywords：LED Reference address：Features of LED portable dual light source rechargeable flashlight

Previous article：Technical requirements for solar LED lamps
Next article：The influence of constant current drive and non-constant current drive on LED digital tubes

Recommended ReadingLatest update time:2024-11-16 20:40

Light-controlled LED lighting

This is an LED lighting lamp with light control function . It does not work during the day and automatically lights up at night. The lamp uses 42 high-brightness white light-emitting diodes, 3 of which are connected in series, and then connected in parallel to the power supply . It is suitable for lighting s

[Power Management]

CH451 drives LED digital tube microcontroller C language example program

CH451 can drive 8-bit digital tubes at one time and communicate with the microcontroller in serial. It supports left shift, right shift, left cycle, right cycle, independent flashing, 16-level brightness control and other functions of the digital tube. It is a powerful assistant for the microcontroller to control multi

[Microcontroller]

How to solve the difficulty of fundamental power factor testing in the LED industry

1. Why does the LED industry need to test fundamental power factor? The general definition of power factor is the ratio of active power to apparent power. A low power factor indicates that the circuit has a large reactive power. The lower the power factor, the heavier the load on the power supply equipment and the mor

[Test Measurement]

Linux-2.6.32 porting LED driver on mini2440 development board

LED driver porting Editor: There are many articles with detailed introductions to LED drivers. There is an article in my blog that specifically explains this. If you need to read it, you can find it. The LED driver actually represents the I/O port driver. Under the Linux system, operating an I/O port can be sai

[Microcontroller]

Linux-2.6.32 porting LED driver on mini2440 development board

Which LED driving method is most suitable?

Using a linear regulator to convert voltage will face power consumption issues, while the switching method will have noise issues. The choice of conversion method for LED drivers depends on the application. What kind of conversion method Converting voltages using linear regulators faces power consumpti

[Power Management]

8051 microcontroller for 8-channel LED analog branch control

1. The design problem uses the P1 port of 8051 as the input and the P0 port as the output, and connects 8 LED analog branch controls through 74LS244. When P1.0 is low level, one LED lights up; when P1.0 is high level and P1.1 is low level, all LEDs light up; when P1.0 and P1.1 are both high level, the LED presses four

[Microcontroller]

Application of LED in indicator light

In the 10 years from the advent of LED in the 1960s to the 1980s, LEDs only had red, yellow, and green colors, and had low luminous efficiency (only about 1 lm/W), low brightness, and high prices. People only used them as indicator lights for electronic products. From the perspective of LED development and applicati

[Power Management]

The P2 port of the microcontroller is connected to 8 switches, and the P0 port is connected to 8 LED lights

question Connect 8 switches to the P2 port of the microcontroller, and connect 8 LED lights to the P0 port (P0 port is required to be connected to the anode of the LED). By controlling the 8 switches of the P2 port, the LED of the P0 port can be turned on and off. That is, when a switch of the P2 port is pressed, the

[Microcontroller]

Popular Resources
Popular amplifiers