DC-DC Power Solutions

Publisher:EnchantingEyesLatest update time:2012-08-05 Source: 电子发烧友Keywords:DC-DC Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere

Avnet Design Service Power Lab develops DC-DC power solutions:

Efficiency: Average 94%, input 12V / output 0~100% load

Wide input voltage range: 5V~16V

Output voltage: +5V and +3.3V

Maximum output current 20A

Built-in soft start and soft stop output discharge

Full range ultrasonic pulse frequency hopping

Overvoltage protection (OVP) / Undervoltage protection (UVP) / Overcurrent protection (OCP)

Power Good Indicator

Key Features

High performance R3 technology

Fast transient response

Output voltage accuracy +/-1%

Programmable switching frequency

Thermal Monitoring and Protection

Small size (60mm*32mm*10.4mm)

2 fully programmable switch mode power supplies

Main Components

ISL62392

883NO3LS

886NO3LS

PG0077.282NL

PG0077.202NL

Keywords:DC-DC Reference address:DC-DC Power Solutions

Previous article:Design and production of high-performance street lamp energy saver
Next article:175W Slim-TV SPS Solution

Recommended ReadingLatest update time:2024-11-16 17:28

Three basic technologies for high-efficiency DC-DC converters
The job of a DC-DC switching converter is to efficiently convert one DC voltage to another. High-efficiency DC-DC converters use three basic technologies: buck, boost, and buck/boost. Buck converters are used to produce low DC output voltages, boost converters are used to produce high DC output voltages, and buck/bo
[Analog Electronics]
Three basic technologies for high-efficiency DC-DC converters
IR FastIRFET Series Offers Industry-Leading Efficiency for DC-DC Synchronous Buck Applications
International Rectifier (IR), a global leader in power semiconductors and management solutions, has launched an innovative 25V FastIRFET power MOSFET series for DC-DC synchronous step-down applications such as advanced telecommunications and networking equipment, servers, graphics cards, desktops, Ultrabooks and noteb
[Power Management]
IR FastIRFET Series Offers Industry-Leading Efficiency for DC-DC Synchronous Buck Applications
AME5280: A DC-DC power management controller
AME5280 is a DC-DC power management controller with a high-efficiency synchronous switching DC converter, an input voltage range of 3V~5.5V, 4A continuous current output, and a maximum instantaneous current output of 5.3A. The transistor on-resistance is only 80mΩ, which can greatly reduce heat waste energy when lar
[Power Management]
MAX8649 High-Efficiency DC-DC Step-Down Switching Regulator
The MAX8649 high-efficiency DC-DC step-down switching regulator provides up to 1.8A of output current. The device operates from a 2.5V to 5.5V input voltage range, making it suitable for next-generation battery technology. The output voltage can be set from 0.75V to 1.38V via the I²C interface. Fully differential re
[Power Management]
MAX8649 High-Efficiency DC-DC Step-Down Switching Regulator
Research on Fully Digital DC-DC Converter
Introduction The phase-shifted full-bridge ZVS DC-DC converter is one of the most widely used soft switching circuits. As a phase-shifted full-bridge converter with excellent performance, the switch tubes of its two bridge arms operate under zero voltage soft switching conditions, with low switching loss and simple
[Power Management]
Research on Fully Digital DC-DC Converter
Design of Current Loop Compensation for Voltage-Controlled DC-DC Converters
Compared with the traditional voltage mode control, the fixed frequency peak current mode PWM (Pulse Width Modulation) DC-DC converter has the advantages of good transient response, high output accuracy, and strong load capacity, so it is widely used. As an important analog unit, the slope compensation circuit and the
[Power Management]
Design of Current Loop Compensation for Voltage-Controlled DC-DC Converters
Synchronous rectification technology DC-DC module power supply
1. Overview 2. Basic synchronous rectification circuit As shown in Figure 1, the secondary side of the circuit is a basic synchronous rectification circuit, and the key waveforms are shown in Figure 2. When the primary main switch Q1 is turned on, energy is transmitted to the secondary sid
[Power Management]
Synchronous rectification technology DC-DC module power supply
Briefly describe the shortcomings and countermeasures in the development of miniaturization of DC-DC switching power supplies
summary This article will briefly analyze the success and shortcomings of high-frequency DC-DC switching power supplies in the process of miniaturization (the second basic goal), and propose measures to improve and deal with them. This will lead to the advent of switching power supplies with high power density,
[Power Management]
Latest Power Management Articles
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号