In indoor lighting, the kitchen is a very important part. As the kitchen space becomes larger, the kitchen is no longer just a space for family members to prepare meals. It has become a place where guests often visit when they come to visit. Therefore, the installation of kitchen lighting and lamps should be like other rooms to facilitate entertaining guests.
The lighting system of a kitchen should be adjustable, that is, when the light feels dim or dazzling, it can be adjusted, and people will feel more comfortable and at ease.
2. The color temperature of the light should be consistent with the atmosphere of the room, or at least similar to the color temperature of other areas of the room.
Third, do not install only a single lighting source in the center of the kitchen. In order to make the kitchen lighting more complete, a multi-level lighting system consisting of different lamps and light sources should be installed in the kitchen.
Fourth, you can install lamps at the low point of the top cabinet to reduce shadows when working.
5. The installation location is also important. Linear incandescent or fluorescent lamps should be installed in the front part facing the cabinet. In this way, part of the light from the lamp will be directed to the backsplash, then reflected to the worktop, and then directed to the center of the entire kitchen. You can also install lighting devices above the cabinet for indirect lighting, such as small spotlights, shining on the upper part of the cabinet, which will not only not be dazzling but also make it easier to take things.
6. If the kitchen space is high enough, you can install a transparent or translucent chandelier on the ceiling as a light source. The chandelier can not only provide excellent lighting, but also is a good decorative item.
Previous article:Study on LED Night Light Circuit for Decorative Clock
Next article:Several measures to solve the main technical problems of LED display screens
- Popular Resources
- Popular amplifiers
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management Systems
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETs
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 meters
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectors
- 采用自主设计封装,绝缘电阻显著提高!ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- CPU architecture, open source architecture and architecture authorization, let me talk about it
- Graduation gown showing scrolling text
- When BLE meets MEMS——Introduction to HID routines and DIY remote control handles
- Popular Science Sharing - Detailed Explanation of the Working Principles of Starlink Satellites (Episode 6)
- GPIO Programming and Example Code for MSP430 using C/C++
- Problems with communication testing for UPS using modbus card
- 【AT-START-F425 Review】1. AT32F425 unpacking and data collection
- Learning ARM-LINUX embedded system based on Beaglebone Black Part 2 - JTAG debugging
- [Newbie help] Problems with creating multiple different files using FATFS
- EEWORLD University Hall ---- EDA Technology and Experiments Zhu Min from Harbin Institute of Technology