The function of silver glue:
fix the chip and conduct electricity.
The main components of silver glue: silver powder accounts for 75-80%, EPOXY (epoxy resin) accounts for 10-15%, and additives account for 5-10%.
Use of silver glue: Refrigerate,
thaw and stir thoroughly before use, because the silver powder will precipitate after the silver glue is left for a long time
. If it is not stirred evenly, the performance of the silver glue will be affected.
The main components of silver glue: silver powder accounts for 75-80%, EPOXY (epoxy resin) accounts for 10-15%, and additives account for 5-10%.
Use of silver glue: Refrigerate,
thaw and stir thoroughly before use, because the silver powder will precipitate after the silver glue is left for a long time
. If it is not stirred evenly, the performance of the silver glue will be affected.
Previous article：Development of YAG:Ce3+ phosphor for LED
Next article：Characteristics of LED luminescent materials
Recommended ReadingLatest update time:2024-11-16 17:34
51 MCU outputs 3-way PWM to drive RGB LED source program
Use the microcontroller interrupt to process PWM, control the ordinary three-color LED, output seven different colors, and change with breathing. It does not take up the program running time. The microcontroller source program is as follows: } else
[Microcontroller]
A brief discussion on the four basic steps to correctly install outdoor LED billboards
Outdoor LED billboards have the advantages of good stability, low consumption, and wide radiation range. They are the most suitable products for outdoor information dissemination. Basically, common LED display screens include advertising screens, strip screens, graphic screens, etc., which are also the first cho
[Power Management]
Konka releases the world's first Micro-LED watch: battery life can reach 35 days
At the 2020 Chongqing Micro-LED Industry Innovation Forum and Konka Semiconductor Display Technology and Product Launch Conference, Konka released the world's first Micro-LED watch. According to the detailed information released by the company, the world's first Micro-LED watch uses a 2-inch microcrystalline screen
[Mobile phone portable]
Apple iPad Pro with Mini LED screen will be launched in Q2
According to the latest news from Digitimes, Apple's 12.9-inch iPad Pro will be equipped with the latest display technology Mini LED screen and will be shipped in the second quarter of this year. If everything goes smoothly, it is expected to be launched in April. In addition, the supplier of the iPhone Mini LED scree
[Mobile phone portable]
Ruifeng Optoelectronics Mini/Micro LED Hubei Production Base Project is officially lit up
Ruifeng Optoelectronics' Mini/Micro LED Hubei production base project has once again made new progress. On May 19, Hubei Ruihua Optoelectronics was officially lit up. Hubei Ruihua Optoelectronics Co., Ltd. is a wholly-owned subsidiary of Ruifeng Optoelectronics. In July 2021, Ruihua Optoelectronics' new display prod
[Mobile phone portable]
LED Graphic Display Screen Control System Based on MCU and FPGA
introduction
At present, small and medium-sized LED display systems on the market generally use traditional single-chip microcomputers as the main control chip. For large-screen LED display screens, due to the large amount of data transmission, fast scanning speed is required, while the internal resourc
[Power Management]
LED display remote control circuit diagram and key values
Function description: Choose a TV remote control, and then use the receiving module combined with the microcontroller decoding to control the 8 LEDs connected to the P1 port to turn on or off.
MCU decoding: The key to MCU decoding is how to identify "0" and "1". Both "0" and "1" start with a low level of 0.56
[Power Management]
Let's discuss how to eliminate LED flicker caused by fluctuating AC input
In LED lighting systems, adding circuitry to improve PFC response time can help eliminate flicker caused by rapidly changing AC input voltage . If the power factor correction (PFC) block does not respond quickly enough, a fluctuating AC input can push the output voltage out of its normal range and cause changes in li
[Power Management]
Siemens PLC Project Tutorial
LED Cube Code
Recommended Content
TI LED driver
TI's new generation RGB LED driver "lights up" human-computer interaction
High-Side Linear LED Driver Products for Automotive Lighting Applications
Introduction to LED functions and considerations for LED driver design
Introduction to LED halo solutions with breathing and rotating effects
Latest Power Management Articles
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management SystemsMathWorks and NXP collaborate to launch Model-Based Design Toolbox for Battery Management Systems, a new toolbox that simplifies the design, testing, and optimization of battery management systems on NXP processors. ...
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETsPower control for industrial motor drives such as air conditioners, home appliances and factory automation, and energy applications such as charging stations, energy storage systems, and power supplies November 13, 2024, China - STMicroelectronics ...
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 metersOn November 13, Tailan New Energy and Changan Automobile jointly announced a major technological breakthrough - the release of diaphragm-free solid-state lithium battery technology. Tailan achieved diaphragm-free solid-state lithium battery technology through disruptive innovation. ...
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectorsGallium oxide (Ga2O3) detector is a photodetector based on ultra-wide bandgap semiconductor materials, mainly used for the detection of solar-blind ultraviolet light. Its unique physical and chemical properties make it widely used in many application fields. ...
- 采用自主设计封装，绝缘电阻显著提高！ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管采用自主设计封装，绝缘电阻显著提高！ROHM开发出支持更高电压xEV系统的SiC肖特基势垒二极管~与普通产品相比，可确保约1 3倍的爬电距离。即 ...
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
MoreSelected Circuit Diagrams
MorePopular Articles
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
MoreDaily News
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
Guess you like
- Does anyone know about the FDS9435 chip?
- Button control water flow light: press key1, LED1-8 will flow in sequence, press key2, LED1/3/5/7 (4 intervals)...
- Tips: Quickly locate components in Altium Designer
- MSP430+DMA
- Can vias be placed on pads?
- AM26LV32E Low Voltage High Speed Quadruple Differential Line Receiver
- Is a 12 bit oscilloscope really necessary?
- 5G Science (Comic Version, So Easy!)
- Design of PCIJMC2000 Computer Data Encryption Card Based on DSP
- Review Weekly: New arrivals, Qinheng wireless charging kit, Beineng cost-effective ATSAMD51 board are waiting for you~20221107
京公网安备 11010802033920号