R&S oscilloscope RTE1204 out-of-tolerance maintenance

Is it troublesome to repair the R&S oscilloscope RTE1204? What should I do if the R&S oscilloscope RTE1204 fails? Have you ever encountered out-of-tolerance conditions on the R&S oscilloscope RTE1204?

I believe that friends who have been engaged in the electrical measurement industry for a long time know that the R&S oscilloscope RTE1204 is out of tolerance and is a common fault. However, the Rohde & Schwarz RTE1204 is an imported high-end brand oscilloscope. Most people do not recommend disassembling and repairing it by yourself, because it is filled with old and new components. Parts and slight improper operation may cause other more serious faults of the R&S oscilloscope RTE1204. So, what should we do at this time? In order not to affect other work, the editor of Antai R&S Oscilloscope Repair Center recommends coming to Antai for repair. Antai Repair is a professional repair center for electrical measuring instruments. Next, please follow the editor of Antai R&S Oscilloscope Repair Center to take a look at the following repair case of the R&S oscilloscope RTE1204. I hope it can help you!

Instrument: R&S oscilloscope RTE1204

Failure: out of tolerance

R&S oscilloscope RTE1204 repair process:

1. Detection: The logic unit of the acquisition board is damaged; the baseline of the 4 channels is unstable after starting up, and the ADC unit of the acquisition board is damaged.

2. Maintenance: replace the logic unit components of the acquisition board, replace the ADC unit components of the acquisition board, and adjust the detection instrument