Agilent E7495B base station comprehensive tester-EEWORLD

Collect

main feature:

Integrate spectrum analysis, antenna and feeder testing, vector network analysis, channel scanning, and modulation analysis into one
Supports WCDMA (UMTS), cdmaOne, CDMA2000 1X, CDMA2000 1x EV-DO, GSM, EDGE GPRS and other standards
Antenna tester with vector network analyzer function, including cable test, distance to fault test (DTF), swept insertion loss test, swept insertion gain test
T1 or E1 test tool
Spectrum analyzer low noise design, sensitivity up to -150dBm
Built-in GPS receiver
Comprehensive interference analysis functions, including: spectrum waterfall chart display function, intensity display function, and modulation signal identification function

Technical indicators:

Frequency accuracy
Use internal time base	±1ppm, more than 15 minutes warm-up time
After GPS lock	±0.03ppm, more than 15 minutes
Input frequency range
10MHz~2.7GHz	Can support 500KHz
maximum input level	+20dBm (1W), +50dBm with attenuator
Maximum input power	<100W (without external attenuator)
Spectrum Analyzers/Tools
Input frequency range (Hz)	10M ~ 2.7G (can support 500KHz)
Reference level range (dBm)	-150 ~ +100
Dynamic range (dBm)	-150 (with 40dB attenuator) ~ +50
Resolution bandwidth (Hz)	10 ~ 1M, can be set to 1Hz accuracy
Span (Hz)	1K~2.6995G
Displayed average noise level	-150dBm (30Hz RBW, 375MHz ~ 1.5GHz)
Antenna/Cable Analyzer
Frequency range (Hz)	375M ~ 2.5G
Full span speed	<17ms
60MHz span speed	<7ms
General characteristics
Display	Anti-reflective color LCD screen
Dimensions (mm) Weight	295×368×135, 9.1Kg (excluding battery)
interface	2 RS-232 (DB9), 2 USB1.1, 1 LAN port 10BaseT
interface	Built-in speakers, PCMCIA card slot, stereo headphone jack, flash card memory
ambient temperature	Working temperature: -10℃~ +50℃; Storage temperature: -40~ +70℃
Options
200	cdmaOne, CDMA2000 1X analyzer option
205	CDMA2000 1xEV-DO analyzer option
220	RF channel scanner option
230	GSM TX analyzer option
240	W-CDMA (UMTS) TX analyzer option
300	DC bias option
500	Signal Generator (CW) Option (Port 1)
501	cdmaOne, CDMA2000 1X, CDMA2000 1x EV-DO (requires Option 205)
510	Reverse link signal generator option (port 1)
600	Power meter options
710	E1 analyzer options

Keywords：Agilent Reference address：Agilent E7495B base station comprehensive tester

Previous article：Wire harness tester for testing of aircraft multi-port cables
Next article：Characteristics and scope of application of 6155 multifunctional electrical device tester

Recommended ReadingLatest update time:2024-11-16 12:25

Agilent oscilloscope antenna test receiver solution

　　Advanced technology improvements and new architectures enable increasingly complex antennas for a variety of applications, including radar and satellite communications in aerospace and wireless. These complex antennas, such as phased array beam steering antennas, can greatly increase the amount of data necessary to

[Test Measurement]

Agilent oscilloscope antenna test receiver solution

Agilent HP HP8753 Series Network Analyzer Calibration Parameters Settings

First, we set the parameters before calibration. Use the and buttons on the keypad to set the start and end frequencies, such as 30kHz~6GHz. The bottom of the screen will display when the settings are completed. Next, set the number of points to be calibrated, such as 1601 points, by pressing the button in the m

[Test Measurement]

Agilent HP HP8753 Series Network Analyzer Calibration Parameters Settings

Popular Resources
Popular amplifiers