Introduction of Mask Stretch Band Tensile Tester

The main purpose:

The mask stretch band tensile tester is mainly used to perform tensile tests on various buckle masks and protective clothing such as medical buckle masks, civilian buckle masks, disposable buckle masks, protective glasses, and protective clothing. It can also be used to perform tensile, tearing, elongation, peeling and other mechanical property tests on plastics, woven bags, non-woven fabrics, plastic films, products, PVC pipes, paper and cardboard, woven bags, packing tapes, tapes, adhesives and other products.

Mask detection:

Mask types: 10N for 10s;

Disposable mask: 50N for 10s;

Replaceable mask: 50N for 10s;

Full face mask: 150N for 10s.

Mask tensile machine applicable standards:

YY/T 0469-2011 Medical surgical buckle cover

YY/T 0969-2013 Disposable medical buckle cover

GB/T 19083-2010 Technical requirements for medical protective buckles

GB/T 32610-2016 Technical specification for daily protective buckle covers

GB/T 2626-2019 Respiratory protection Self-priming filter type anti-particulate respirator

GB/T 19082-2009 Technical requirements for disposable medical protective clothing

GB/T 10213-2006 Disposable medical rubber examination gloves

Technical Parameters:

1. Accuracy level: 0.5;

2. Optional range: 5-2000N;

3. Effective force measurement range: 0.2/100-100/%;

4. Test result unit selection: gf, kgf, N, KN, LB;

5. Test force resolution, load 500,000 yards: no division inside and outside, and the resolution remains unchanged throughout the whole process;

6. Effective test width: 150mm, effective stretching space: 800mm;

7. Test speed: 0.01~500mm/min (adjustable at will);

8. Speed ​​accuracy: within ±0.5% of the indicated value;

9. Displacement measurement accuracy: within ±0.5% of the indicated value;

10. Deformation measurement accuracy: within ±0.5% of the indicated value;

11. Power supply: 200V, 400W.