How to maintain the electrodes of imported electromagnetic flowmeter

Abstract: Since the electrodes of the electromagnetic flowmeter often come into contact with the measured liquid, we need to maintain the electrodes of the electromagnetic flowmeter regularly. This can ensure the normal operation of the electromagnetic flowmeter. Let's take a closer look at the maintenance knowledge of the electrodes of the imported electromagnetic flowmeter. 
Since the electrodes of the electromagnetic flowmeter often come into contact with the measured liquid, we need to maintain the electrodes of the electromagnetic flowmeter regularly. This can ensure the normal operation of the electromagnetic flowmeter. Let's take a closer look at the maintenance knowledge of the electrodes of the imported electromagnetic flowmeter.
1. Before using the electromagnetic flowmeter, calibrate the electromagnetic flowmeter with a standard pH solution. Then clean the electrodes of the electromagnetic flowmeter with distilled water and measuring liquid.
2. When the electromagnetic flowmeter is not in use, remove the electrode, and be careful not to let the electrode's touch sensor collide with hard objects to avoid damaging the electrode.
3. After using the electromagnetic flowmeter, put on the electrode cover, put a little saturated solution in it, and ensure that the electrode bulb is moist. Do not soak the electrode in distilled water.
4. Keep the electrode clean at ordinary times, and do not short-circuit the output on both sides, otherwise it will affect the measurement accuracy of the electromagnetic flowmeter.
In summary, the above briefly introduces some maintenance methods for electromagnetic flowmeter electrodes. You must pay more attention when using electromagnetic flowmeters to avoid trouble.