Gas turbine flowmeter product features

Product features of gas turbine flowmeter 

1. High accuracy, generally up to ±1%R, ±0.5%R, high-precision type up to ±0.2%R; 
2. Wide range, medium and large diameter up to 1:20, small diameter 1:10; 
3. Compact and lightweight structure, easy installation and maintenance, large flow capacity; 
4. Suitable for high-pressure measurement, no need to open holes on the meter body, easy to make high-pressure instruments; 
5. Good repeatability, short-term repeatability can reach 0.05%~0.2%. It is precisely because of its good repeatability that high accuracy can be obtained through frequent calibration or online calibration, and it is the preferred flowmeter in trade settlement; 
6. All valid data will not be lost for 10 years after power failure; 
7. There are many types of special sensors, which can be designed as various special sensors according to the special needs of users, such as low-temperature type, bidirectional type, downhole type, sand mixing special type, etc.; 
8. It can be made into an insertion type, suitable for large-caliber measurement, with small pressure loss, low price, can be taken out without stopping, and easy to install and maintain. 
9. It has three-point correction of instrument coefficient, intelligent compensation of instrument coefficient nonlinearity, and can be corrected on site